Commit 1e141cf1 authored by Chris Morgan's avatar Chris Morgan Committed by Heiko Stuebner
Browse files

arm64: dts: rockchip: add Anbernic RG353V and RG353VS 



Anbernic RG353V and RG353VS are both RK3566 based handheld gaming devices
from Anbernic.

They are functionally very similar to the RG353P with the following
distinct differences:
 - The battery size of the RG353V and RG353VS is 3200mAh instead of
   3500mAh.
 - The audio uses the PMIC's internal amplifier for a mono speaker
   instead of an external amplifier with stereo speakers.
 - The GPIOs for the R1 and R2 buttons are switched.

As for the differences between the RG353V and RG353VS, they are as
follows:
 - The RG353VS has no touchscreen on i2c2.
 - The RG353VS has no eMMC.
 - The RG353VS has 1GB of RAM instead of 2GB.

Signed-off-by: default avatarChris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221028184045.13113-3-macroalpha82@gmail.com


Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent e1cc1e71

arch/arm64/boot/dts/rockchip/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -63,6 +63,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb 
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb

dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts

+44 −39
Original line number Diff line number Diff line
@@ -5,7 +5,7 @@ 
#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/linux-event-codes.h>

#include <dt-bindings/pinctrl/rockchip.h>

#include "rk3566-anbernic-rgxx3.dtsi"

#include "rk3566-anbernic-rg353x.dtsi"



/ {

	model = "RG353P";
@@ -18,26 +18,47 @@ aliases { 
		mmc3 = &sdmmc2;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		power-supply = <&vcc_sys>;

		pwms = <&pwm4 0 25000 0>;

	};

	/* Channels reversed for both headphones and speakers. */

	sound {

		compatible = "simple-audio-card";

		simple-audio-card,name = "rk817_ext";

		simple-audio-card,aux-devs = <&spk_amp>;

		simple-audio-card,format = "i2s";

		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;

		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,widgets =

			"Microphone", "Mic Jack",

			"Headphone", "Headphones",

			"Speaker", "Internal Speakers";

		simple-audio-card,routing =

			"MICL", "Mic Jack",

			"Headphones", "HPOL",

			"Headphones", "HPOR",

			"Internal Speakers", "Speaker Amp OUTL",

			"Internal Speakers", "Speaker Amp OUTR",

			"Speaker Amp INL", "HPOL",

			"Speaker Amp INR", "HPOR";

		simple-audio-card,pin-switches = "Internal Speakers";



		simple-audio-card,codec {

			sound-dai = <&rk817>;

		};



&gpio_keys_control {

	button-a {

		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;

		label = "EAST";

		linux,code = <BTN_EAST>;

		simple-audio-card,cpu {

			sound-dai = <&i2s1_8ch>;

		};

	};



	button-left {

		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;

		label = "DPAD-LEFT";

		linux,code = <BTN_DPAD_LEFT>;

	spk_amp: audio-amplifier {

		compatible = "simple-audio-amplifier";

		enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;

		pinctrl-0 = <&spk_amp_enable_h>;

		pinctrl-names = "default";

		sound-name-prefix = "Speaker Amp";

	};

};



&gpio_keys_control {

	button-r1 {

		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;

		label = "TR";
@@ -49,27 +70,6 @@ button-r2 { 
		label = "TR2";

		linux,code = <BTN_TR2>;

	};



	button-right {

		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;

		label = "DPAD-RIGHT";

		linux,code = <BTN_DPAD_RIGHT>;

	};



	button-y {

		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;

		label = "WEST";

		linux,code = <BTN_WEST>;

	};

};



&i2c0 {

	/* This hardware is physically present but unused. */

	power-monitor@62 {

		compatible = "cellwise,cw2015";

		reg = <0x62>;

		status = "disabled";

	};

};



&i2c2 {
@@ -78,8 +78,13 @@ &i2c2 { 
	status = "okay";

};



&pwm4 {

	status = "okay";

&pinctrl {

	audio-amplifier {

		spk_amp_enable_h: spk-amp-enable-h {

			rockchip,pins =

				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;

		};

	};

};



&sdhci {

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts

0 → 100644
+114 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/linux-event-codes.h>

#include <dt-bindings/pinctrl/rockchip.h>

#include "rk3566-anbernic-rg353x.dtsi"



/ {

	model = "RG353V";

	compatible = "anbernic,rg353v", "rockchip,rk3566";



	aliases {

		mmc0 = &sdhci;

		mmc1 = &sdmmc0;

		mmc2 = &sdmmc1;

		mmc3 = &sdmmc2;

	};



	battery: battery {

		compatible = "simple-battery";

		charge-full-design-microamp-hours = <3151000>;

		charge-term-current-microamp = <300000>;

		constant-charge-current-max-microamp = <2000000>;

		constant-charge-voltage-max-microvolt = <4200000>;

		factory-internal-resistance-micro-ohms = <117000>;

		voltage-max-design-microvolt = <4172000>;

		voltage-min-design-microvolt = <3400000>;



		ocv-capacity-celsius = <20>;

		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,

					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,

					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,

					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,

					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,

					<3400000 0>;

	};



	/* Channels reversed for headphones. */

	sound {

		compatible = "simple-audio-card";

		simple-audio-card,name = "rk817_int";

		simple-audio-card,format = "i2s";

		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;

		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,widgets =

			"Microphone", "Mic Jack",

			"Headphone", "Headphones",

			"Speaker", "Internal Speakers";

		simple-audio-card,routing =

			"MICL", "Mic Jack",

			"Headphones", "HPOL",

			"Headphones", "HPOR",

			"Internal Speakers", "SPKO";



		simple-audio-card,codec {

			sound-dai = <&rk817>;

		};



		simple-audio-card,cpu {

			sound-dai = <&i2s1_8ch>;

		};

	};

};



&gpio_keys_control {

	button-r1 {

		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;

		label = "TR";

		linux,code = <BTN_TR>;

	};



	button-r2 {

		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;

		label = "TR2";

		linux,code = <BTN_TR2>;

	};

};



&i2c2 {

	pintctrl-names = "default";

	pinctrl-0 = <&i2c2m1_xfer>;

	status = "okay";

};



&pinctrl {

	touch {

		touch_rst: touch-rst {

			rockchip,pins =

				<4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;

		};

	};

};



&rk817 {

	rk817_charger: charger {

		monitored-battery = <&battery>;

		rockchip,resistor-sense-micro-ohms = <10000>;

		rockchip,sleep-enter-current-microamp = <300000>;

		rockchip,sleep-filter-current-microamp = <100000>;

	};

};



&sdhci {

	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;

	pinctrl-names = "default";

	bus-width = <8>;

	mmc-hs200-1_8v;

	non-removable;

	vmmc-supply = <&vcc_3v3>;

	vqmmc-supply = <&vcc_1v8>;

	status = "okay";

};

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts

0 → 100644
+87 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/linux-event-codes.h>

#include <dt-bindings/pinctrl/rockchip.h>

#include "rk3566-anbernic-rg353x.dtsi"



/ {

	model = "RG353VS";

	compatible = "anbernic,rg353vs", "rockchip,rk3566";



	aliases {

		mmc0 = &sdmmc0;

		mmc1 = &sdmmc1;

		mmc2 = &sdmmc2;

	};



	battery: battery {

		compatible = "simple-battery";

		charge-full-design-microamp-hours = <3151000>;

		charge-term-current-microamp = <300000>;

		constant-charge-current-max-microamp = <2000000>;

		constant-charge-voltage-max-microvolt = <4200000>;

		factory-internal-resistance-micro-ohms = <117000>;

		voltage-max-design-microvolt = <4172000>;

		voltage-min-design-microvolt = <3400000>;



		ocv-capacity-celsius = <20>;

		ocv-capacity-table-0 =  <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,

					<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,

					<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,

					<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,

					<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,

					<3400000 0>;

	};



	/* Channels reversed for headphones. */

	sound {

		compatible = "simple-audio-card";

		simple-audio-card,name = "rk817_int";

		simple-audio-card,format = "i2s";

		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;

		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,widgets =

			"Microphone", "Mic Jack",

			"Headphone", "Headphones",

			"Speaker", "Internal Speakers";

		simple-audio-card,routing =

			"MICL", "Mic Jack",

			"Headphones", "HPOL",

			"Headphones", "HPOR",

			"Internal Speakers", "SPKO";



		simple-audio-card,codec {

			sound-dai = <&rk817>;

		};



		simple-audio-card,cpu {

			sound-dai = <&i2s1_8ch>;

		};

	};

};



&gpio_keys_control {

	button-r1 {

		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;

		label = "TR";

		linux,code = <BTN_TR>;

	};



	button-r2 {

		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;

		label = "TR2";

		linux,code = <BTN_TR2>;

	};

};



&rk817 {

	rk817_charger: charger {

		monitored-battery = <&battery>;

		rockchip,resistor-sense-micro-ohms = <10000>;

		rockchip,sleep-enter-current-microamp = <300000>;

		rockchip,sleep-filter-current-microamp = <100000>;

	};

};

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi

0 → 100644
+60 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/linux-event-codes.h>

#include <dt-bindings/pinctrl/rockchip.h>

#include "rk3566-anbernic-rgxx3.dtsi"



/ {

	backlight: backlight {

		compatible = "pwm-backlight";

		power-supply = <&vcc_sys>;

		pwms = <&pwm4 0 25000 0>;

	};

};



&cru {

	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;

	assigned-clock-rates = <1200000000>, <200000000>, <241500000>;

};



&gpio_keys_control {

	button-a {

		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;

		label = "EAST";

		linux,code = <BTN_EAST>;

	};



	button-left {

		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;

		label = "DPAD-LEFT";

		linux,code = <BTN_DPAD_LEFT>;

	};



	button-right {

		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;

		label = "DPAD-RIGHT";

		linux,code = <BTN_DPAD_RIGHT>;

	};



	button-y {

		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;

		label = "WEST";

		linux,code = <BTN_WEST>;

	};

};



&i2c0 {

	/* This hardware is physically present but unused. */

	power-monitor@62 {

		compatible = "cellwise,cw2015";

		reg = <0x62>;

		status = "disabled";

	};

};



&pwm4 {

	status = "okay";

};