Commit 34833558 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: pcl711: tidy up multi line comments 



Tidy up the multi line comments to follow the CodingStyle.

Remove the multi line comment about an alternate driver for the
PCL-711. The http address does not work and the driver history
in the comment is unnecessary.

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 102e95cd

drivers/staging/comedi/drivers/pcl711.c

+33 −49
Original line number Diff line number Diff line 
/*

   comedi/drivers/pcl711.c

   hardware driver for PC-LabCard PCL-711 and AdSys ACL-8112

   and compatibles



   COMEDI - Linux Control and Measurement Device Interface

   Copyright (C) 1998 David A. Schleef <ds@schleef.org>

   Janne Jalkanen <jalkanen@cs.hut.fi>

   Eric Bunn <ebu@cs.hut.fi>



   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 2 of the License, or

   (at your option) any later version.



   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

 */

/*

Driver: pcl711

Description: Advantech PCL-711 and 711b, ADLink ACL-8112

Author: ds, Janne Jalkanen <jalkanen@cs.hut.fi>, Eric Bunn <ebu@cs.hut.fi>

Status: mostly complete

Devices: [Advantech] PCL-711 (pcl711), PCL-711B (pcl711b),

  [AdLink] ACL-8112HG (acl8112hg), ACL-8112DG (acl8112dg)



Since these boards do not have DMA or FIFOs, only immediate mode is

supported.



 * pcl711.c

 * Comedi driver for PC-LabCard PCL-711 and AdSys ACL-8112 and compatibles

 * Copyright (C) 1998 David A. Schleef <ds@schleef.org>

 *		      Janne Jalkanen <jalkanen@cs.hut.fi>

 *		      Eric Bunn <ebu@cs.hut.fi>

 *

 * COMEDI - Linux Control and Measurement Device Interface

 * Copyright (C) 1998 David A. Schleef <ds@schleef.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/*

   Dave Andruczyk <dave@tech.buffalostate.edu> also wrote a

   driver for the PCL-711.  I used a few ideas from his driver

   here.  His driver also has more comments, if you are

   interested in understanding how this driver works.

   http://tech.buffalostate.edu/~dave/driver/



   The ACL-8112 driver was hacked from the sources of the PCL-711

   driver (the 744 chip used on the 8112 is almost the same as

   the 711b chip, but it has more I/O channels) by

   Janne Jalkanen (jalkanen@cs.hut.fi) and

   Erik Bunn (ebu@cs.hut.fi).  Remerged with the PCL-711 driver

   by ds.



   [acl-8112]

   This driver supports both TRIGNOW and TRIGCLK,

   but does not yet support DMA transfers.  It also supports

   both high (HG) and low (DG) versions of the card, though

   the HG version has been untested.



 * Driver: pcl711

 * Description: Advantech PCL-711 and 711b, ADLink ACL-8112

 * Devices: (Advantech) PCL-711 [pcl711]

 *	    (Advantech) PCL-711B [pcl711b]

 *	    (AdLink) ACL-8112HG [acl8112hg]

 *	    (AdLink) ACL-8112DG [acl8112dg]

 * Author: David A. Schleef <ds@schleef.org>

 *	   Janne Jalkanen <jalkanen@cs.hut.fi>

 *	   Eric Bunn <ebu@cs.hut.fi>

 * Updated:

 * Status: mostly complete

 *

 * Configuration Options:

 *   [0] - I/O port base

 *   [1] - IRQ, optional

 */



#include <linux/module.h>