Commit 384e338a authored by Paul Gortmaker's avatar Paul Gortmaker Committed by Michael Ellerman
Browse files

powerpc: drop MPC8540_ADS and MPC8560_ADS platform support 



Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.

Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.

As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.

In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.

Given that, it makes sense to remove support from them in 2023.

Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com
parent e66effaf

arch/powerpc/boot/Makefile

+0 −2
Original line number Diff line number Diff line
@@ -342,8 +342,6 @@ image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 
image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot



# Board ports in arch/powerpc/platform/85xx/Kconfig

image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads

image-$(CONFIG_MPC8560_ADS)		+= cuImage.mpc8560ads

image-$(CONFIG_MPC85xx_CDS)		+= cuImage.mpc8541cds \

					   cuImage.mpc8548cds_32b \

					   cuImage.mpc8555cds

arch/powerpc/boot/dts/fsl/mpc8540ads.dts

deleted100644 → 0
+0 −355
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later

/*

 * MPC8540 ADS Device Tree Source

 *

 * Copyright 2006, 2008 Freescale Semiconductor Inc.

 */



/dts-v1/;



/include/ "e500v1_power_isa.dtsi"



/ {

	model = "MPC8540ADS";

	compatible = "MPC8540ADS", "MPC85xxADS";

	#address-cells = <1>;

	#size-cells = <1>;



	aliases {

		ethernet0 = &enet0;

		ethernet1 = &enet1;

		ethernet2 = &enet2;

		serial0 = &serial0;

		serial1 = &serial1;

		pci0 = &pci0;

	};



	cpus {

		#address-cells = <1>;

		#size-cells = <0>;



		PowerPC,8540@0 {

			device_type = "cpu";

			reg = <0x0>;

			d-cache-line-size = <32>;	// 32 bytes

			i-cache-line-size = <32>;	// 32 bytes

			d-cache-size = <0x8000>;		// L1, 32K

			i-cache-size = <0x8000>;		// L1, 32K

			timebase-frequency = <0>;	//  33 MHz, from uboot

			bus-frequency = <0>;	// 166 MHz

			clock-frequency = <0>;	// 825 MHz, from uboot

			next-level-cache = <&L2>;

		};

	};



	memory {

		device_type = "memory";

		reg = <0x0 0x8000000>;	// 128M at 0x0

	};



	soc8540@e0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		device_type = "soc";

		compatible = "simple-bus";

		ranges = <0x0 0xe0000000 0x100000>;

		bus-frequency = <0>;



		ecm-law@0 {

			compatible = "fsl,ecm-law";

			reg = <0x0 0x1000>;

			fsl,num-laws = <8>;

		};



		ecm@1000 {

			compatible = "fsl,mpc8540-ecm", "fsl,ecm";

			reg = <0x1000 0x1000>;

			interrupts = <17 2>;

			interrupt-parent = <&mpic>;

		};



		memory-controller@2000 {

			compatible = "fsl,mpc8540-memory-controller";

			reg = <0x2000 0x1000>;

			interrupt-parent = <&mpic>;

			interrupts = <18 2>;

		};



		L2: l2-cache-controller@20000 {

			compatible = "fsl,mpc8540-l2-cache-controller";

			reg = <0x20000 0x1000>;

			cache-line-size = <32>;	// 32 bytes

			cache-size = <0x40000>;	// L2, 256K

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

		};



		i2c@3000 {

			#address-cells = <1>;

			#size-cells = <0>;

			cell-index = <0>;

			compatible = "fsl-i2c";

			reg = <0x3000 0x100>;

			interrupts = <43 2>;

			interrupt-parent = <&mpic>;

			dfsrr;

		};



		dma@21300 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";

			reg = <0x21300 0x4>;

			ranges = <0x0 0x21100 0x200>;

			cell-index = <0>;

			dma-channel@0 {

				compatible = "fsl,mpc8540-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x0 0x80>;

				cell-index = <0>;

				interrupt-parent = <&mpic>;

				interrupts = <20 2>;

			};

			dma-channel@80 {

				compatible = "fsl,mpc8540-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x80 0x80>;

				cell-index = <1>;

				interrupt-parent = <&mpic>;

				interrupts = <21 2>;

			};

			dma-channel@100 {

				compatible = "fsl,mpc8540-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x100 0x80>;

				cell-index = <2>;

				interrupt-parent = <&mpic>;

				interrupts = <22 2>;

			};

			dma-channel@180 {

				compatible = "fsl,mpc8540-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x180 0x80>;

				cell-index = <3>;

				interrupt-parent = <&mpic>;

				interrupts = <23 2>;

			};

		};



		enet0: ethernet@24000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <0>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <0x24000 0x1000>;

			ranges = <0x0 0x24000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <29 2 30 2 34 2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi0>;

			phy-handle = <&phy0>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-mdio";

				reg = <0x520 0x20>;



				phy0: ethernet-phy@0 {

					interrupt-parent = <&mpic>;

					interrupts = <5 1>;

					reg = <0x0>;

				};

				phy1: ethernet-phy@1 {

					interrupt-parent = <&mpic>;

					interrupts = <5 1>;

					reg = <0x1>;

				};

				phy3: ethernet-phy@3 {

					interrupt-parent = <&mpic>;

					interrupts = <7 1>;

					reg = <0x3>;

				};

				tbi0: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		enet1: ethernet@25000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <1>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <0x25000 0x1000>;

			ranges = <0x0 0x25000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <35 2 36 2 40 2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi1>;

			phy-handle = <&phy1>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-tbi";

				reg = <0x520 0x20>;



				tbi1: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		enet2: ethernet@26000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <2>;

			device_type = "network";

			model = "FEC";

			compatible = "gianfar";

			reg = <0x26000 0x1000>;

			ranges = <0x0 0x26000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <41 2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi2>;

			phy-handle = <&phy3>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-tbi";

				reg = <0x520 0x20>;



				tbi2: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		serial0: serial@4500 {

			cell-index = <0>;

			device_type = "serial";

			compatible = "fsl,ns16550", "ns16550";

			reg = <0x4500 0x100>; 	// reg base, size

			clock-frequency = <0>; 	// should we fill in in uboot?

			interrupts = <42 2>;

			interrupt-parent = <&mpic>;

		};



		serial1: serial@4600 {

			cell-index = <1>;

			device_type = "serial";

			compatible = "fsl,ns16550", "ns16550";

			reg = <0x4600 0x100>;	// reg base, size

			clock-frequency = <0>; 	// should we fill in in uboot?

			interrupts = <42 2>;

			interrupt-parent = <&mpic>;

		};

		mpic: pic@40000 {

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			reg = <0x40000 0x40000>;

			compatible = "chrp,open-pic";

			device_type = "open-pic";

		};

	};



	pci0: pci@e0008000 {

		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;

		interrupt-map = <



			/* IDSEL 0x02 */

			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1

			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1

			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1

			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1



			/* IDSEL 0x03 */

			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1

			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1

			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1

			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1



			/* IDSEL 0x04 */

			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1

			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1

			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1

			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1



			/* IDSEL 0x05 */

			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1

			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1

			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1

			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1



			/* IDSEL 0x0c */

			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1

			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1

			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1

			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1



			/* IDSEL 0x0d */

			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1

			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1

			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1

			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1



			/* IDSEL 0x0e */

			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1

			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1

			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1

			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1



			/* IDSEL 0x0f */

			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1

			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1

			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1

			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1



			/* IDSEL 0x12 */

			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1

			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1

			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1

			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1



			/* IDSEL 0x13 */

			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1

			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1

			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1

			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1



			/* IDSEL 0x14 */

			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1

			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1

			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1

			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1



			/* IDSEL 0x15 */

			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1

			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1

			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1

			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;

		interrupt-parent = <&mpic>;

		interrupts = <24 2>;

		bus-range = <0 0>;

		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000

			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;

		clock-frequency = <66666666>;

		#interrupt-cells = <1>;

		#size-cells = <2>;

		#address-cells = <3>;

		reg = <0xe0008000 0x1000>;

		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";

		device_type = "pci";

	};

};

arch/powerpc/boot/dts/fsl/mpc8560ads.dts

deleted100644 → 0
+0 −388
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0-or-later

/*

 * MPC8560 ADS Device Tree Source

 *

 * Copyright 2006, 2008 Freescale Semiconductor Inc.

 */



/dts-v1/;



/include/ "e500v1_power_isa.dtsi"



/ {

	model = "MPC8560ADS";

	compatible = "MPC8560ADS", "MPC85xxADS";

	#address-cells = <1>;

	#size-cells = <1>;



	aliases {

		ethernet0 = &enet0;

		ethernet1 = &enet1;

		ethernet2 = &enet2;

		ethernet3 = &enet3;

		serial0 = &serial0;

		serial1 = &serial1;

		pci0 = &pci0;

	};



	cpus {

		#address-cells = <1>;

		#size-cells = <0>;



		PowerPC,8560@0 {

			device_type = "cpu";

			reg = <0x0>;

			d-cache-line-size = <32>;	// 32 bytes

			i-cache-line-size = <32>;	// 32 bytes

			d-cache-size = <0x8000>;		// L1, 32K

			i-cache-size = <0x8000>;		// L1, 32K

			timebase-frequency = <82500000>;

			bus-frequency = <330000000>;

			clock-frequency = <825000000>;

		};

	};



	memory {

		device_type = "memory";

		reg = <0x0 0x10000000>;

	};



	soc8560@e0000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		device_type = "soc";

		compatible = "simple-bus";

		ranges = <0x0 0xe0000000 0x100000>;

		bus-frequency = <330000000>;



		ecm-law@0 {

			compatible = "fsl,ecm-law";

			reg = <0x0 0x1000>;

			fsl,num-laws = <8>;

		};



		ecm@1000 {

			compatible = "fsl,mpc8560-ecm", "fsl,ecm";

			reg = <0x1000 0x1000>;

			interrupts = <17 2>;

			interrupt-parent = <&mpic>;

		};



		memory-controller@2000 {

			compatible = "fsl,mpc8540-memory-controller";

			reg = <0x2000 0x1000>;

			interrupt-parent = <&mpic>;

			interrupts = <18 2>;

		};



		L2: l2-cache-controller@20000 {

			compatible = "fsl,mpc8540-l2-cache-controller";

			reg = <0x20000 0x1000>;

			cache-line-size = <32>;	// 32 bytes

			cache-size = <0x40000>;	// L2, 256K

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

		};



		dma@21300 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";

			reg = <0x21300 0x4>;

			ranges = <0x0 0x21100 0x200>;

			cell-index = <0>;

			dma-channel@0 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x0 0x80>;

				cell-index = <0>;

				interrupt-parent = <&mpic>;

				interrupts = <20 2>;

			};

			dma-channel@80 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x80 0x80>;

				cell-index = <1>;

				interrupt-parent = <&mpic>;

				interrupts = <21 2>;

			};

			dma-channel@100 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x100 0x80>;

				cell-index = <2>;

				interrupt-parent = <&mpic>;

				interrupts = <22 2>;

			};

			dma-channel@180 {

				compatible = "fsl,mpc8560-dma-channel",

						"fsl,eloplus-dma-channel";

				reg = <0x180 0x80>;

				cell-index = <3>;

				interrupt-parent = <&mpic>;

				interrupts = <23 2>;

			};

		};



		enet0: ethernet@24000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <0>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <0x24000 0x1000>;

			ranges = <0x0 0x24000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <29 2 30 2 34 2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi0>;

			phy-handle = <&phy0>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-mdio";

				reg = <0x520 0x20>;



				phy0: ethernet-phy@0 {

					interrupt-parent = <&mpic>;

					interrupts = <5 1>;

					reg = <0x0>;

				};

				phy1: ethernet-phy@1 {

					interrupt-parent = <&mpic>;

					interrupts = <5 1>;

					reg = <0x1>;

				};

				phy2: ethernet-phy@2 {

					interrupt-parent = <&mpic>;

					interrupts = <7 1>;

					reg = <0x2>;

				};

				phy3: ethernet-phy@3 {

					interrupt-parent = <&mpic>;

					interrupts = <7 1>;

					reg = <0x3>;

				};

				tbi0: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		enet1: ethernet@25000 {

			#address-cells = <1>;

			#size-cells = <1>;

			cell-index = <1>;

			device_type = "network";

			model = "TSEC";

			compatible = "gianfar";

			reg = <0x25000 0x1000>;

			ranges = <0x0 0x25000 0x1000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <35 2 36 2 40 2>;

			interrupt-parent = <&mpic>;

			tbi-handle = <&tbi1>;

			phy-handle = <&phy1>;



			mdio@520 {

				#address-cells = <1>;

				#size-cells = <0>;

				compatible = "fsl,gianfar-tbi";

				reg = <0x520 0x20>;



				tbi1: tbi-phy@11 {

					reg = <0x11>;

					device_type = "tbi-phy";

				};

			};

		};



		mpic: pic@40000 {

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			reg = <0x40000 0x40000>;

			compatible = "chrp,open-pic";

			device_type = "open-pic";

		};



		cpm@919c0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";

			reg = <0x919c0 0x30>;

			ranges;



			muram@80000 {

				#address-cells = <1>;

				#size-cells = <1>;

				ranges = <0x0 0x80000 0x10000>;



				data@0 {

					compatible = "fsl,cpm-muram-data";

					reg = <0x0 0x4000 0x9000 0x2000>;

				};

			};



			brg@919f0 {

				compatible = "fsl,mpc8560-brg",

				             "fsl,cpm2-brg",

				             "fsl,cpm-brg";

				reg = <0x919f0 0x10 0x915f0 0x10>;

				clock-frequency = <165000000>;

			};



			cpmpic: pic@90c00 {

				interrupt-controller;

				#address-cells = <0>;

				#interrupt-cells = <2>;

				interrupts = <46 2>;

				interrupt-parent = <&mpic>;

				reg = <0x90c00 0x80>;

				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";

			};



			serial0: serial@91a00 {

				device_type = "serial";

				compatible = "fsl,mpc8560-scc-uart",

				             "fsl,cpm2-scc-uart";

				reg = <0x91a00 0x20 0x88000 0x100>;

				fsl,cpm-brg = <1>;

				fsl,cpm-command = <0x800000>;

				current-speed = <115200>;

				interrupts = <40 8>;

				interrupt-parent = <&cpmpic>;

			};



			serial1: serial@91a20 {

				device_type = "serial";

				compatible = "fsl,mpc8560-scc-uart",

				             "fsl,cpm2-scc-uart";

				reg = <0x91a20 0x20 0x88100 0x100>;

				fsl,cpm-brg = <2>;

				fsl,cpm-command = <0x4a00000>;

				current-speed = <115200>;

				interrupts = <41 8>;

				interrupt-parent = <&cpmpic>;

			};



			enet2: ethernet@91320 {

				device_type = "network";

				compatible = "fsl,mpc8560-fcc-enet",

				             "fsl,cpm2-fcc-enet";

				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;

				local-mac-address = [ 00 00 00 00 00 00 ];

				fsl,cpm-command = <0x16200300>;

				interrupts = <33 8>;

				interrupt-parent = <&cpmpic>;

				phy-handle = <&phy2>;

			};



			enet3: ethernet@91340 {

				device_type = "network";

				compatible = "fsl,mpc8560-fcc-enet",

				             "fsl,cpm2-fcc-enet";

				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;

				local-mac-address = [ 00 00 00 00 00 00 ];

				fsl,cpm-command = <0x1a400300>;

				interrupts = <34 8>;

				interrupt-parent = <&cpmpic>;

				phy-handle = <&phy3>;

			};

		};

	};



	pci0: pci@e0008000 {

		#interrupt-cells = <1>;

		#size-cells = <2>;

		#address-cells = <3>;

		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";

		device_type = "pci";

		reg = <0xe0008000 0x1000>;

		clock-frequency = <66666666>;

		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;

		interrupt-map = <



				/* IDSEL 0x2 */

				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1

				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1

				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1

				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1



				/* IDSEL 0x3 */

				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1

				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1

				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1

				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1



				/* IDSEL 0x4 */

				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1

				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1

				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1

				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1



				/* IDSEL 0x5  */

				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1

				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1

				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1

				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1



				/* IDSEL 12 */

				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1

				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1

				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1

				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1



				/* IDSEL 13 */

				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1

				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1

				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1

				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1



				/* IDSEL 14*/

				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1

				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1

				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1

				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1



				/* IDSEL 15 */

				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1

				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1

				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1

				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1



				/* IDSEL 18 */

				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1

				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1

				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1

				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1



				/* IDSEL 19 */

				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1

				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1

				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1

				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1



				/* IDSEL 20 */

				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1

				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1

				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1

				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1



				/* IDSEL 21 */

				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1

				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1

				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1

				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;



		interrupt-parent = <&mpic>;

		interrupts = <24 2>;

		bus-range = <0 0>;

		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000

			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;

	};

};

arch/powerpc/configs/85xx/mpc8540_ads_defconfig

deleted100644 → 0
+0 −47
Original line number Diff line number Diff line 
CONFIG_PPC_85xx=y

CONFIG_SYSVIPC=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_BLK_DEV_INITRD=y

CONFIG_EXPERT=y

# CONFIG_BLK_DEV_BSG is not set

CONFIG_PARTITION_ADVANCED=y

# CONFIG_MSDOS_PARTITION is not set

CONFIG_MPC8540_ADS=y

CONFIG_GEN_RTC=y

CONFIG_BINFMT_MISC=y

CONFIG_MATH_EMULATION=y

# CONFIG_SECCOMP is not set

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_XFRM_USER=y

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

CONFIG_SYN_COOKIES=y

# CONFIG_IPV6 is not set

# CONFIG_FW_LOADER is not set

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_SIZE=32768

CONFIG_NETDEVICES=y

CONFIG_GIANFAR=y

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

# CONFIG_SERIO is not set

# CONFIG_VT is not set

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_CONSOLE=y

# CONFIG_HW_RANDOM is not set

CONFIG_EXT2_FS=y

CONFIG_EXT4_FS=y

CONFIG_PROC_KCORE=y

CONFIG_TMPFS=y

CONFIG_NFS_FS=y

CONFIG_ROOT_NFS=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_MUTEXES=y

arch/powerpc/configs/85xx/mpc8560_ads_defconfig

deleted100644 → 0
+0 −50
Original line number Diff line number Diff line 
CONFIG_PPC_85xx=y

CONFIG_SYSVIPC=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_BLK_DEV_INITRD=y

CONFIG_EXPERT=y

# CONFIG_BLK_DEV_BSG is not set

CONFIG_PARTITION_ADVANCED=y

# CONFIG_MSDOS_PARTITION is not set

CONFIG_MPC8560_ADS=y

CONFIG_GEN_RTC=y

CONFIG_BINFMT_MISC=y

CONFIG_MATH_EMULATION=y

# CONFIG_SECCOMP is not set

CONFIG_PCI=y

CONFIG_PCI_DEBUG=y

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

CONFIG_SYN_COOKIES=y

# CONFIG_IPV6 is not set

# CONFIG_FW_LOADER is not set

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_SIZE=32768

CONFIG_NETDEVICES=y

CONFIG_FS_ENET=y

# CONFIG_FS_ENET_HAS_SCC is not set

CONFIG_GIANFAR=y

CONFIG_E1000=y

CONFIG_DAVICOM_PHY=y

CONFIG_MARVELL_PHY=y

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

# CONFIG_SERIO is not set

# CONFIG_VT is not set

CONFIG_SERIAL_CPM=y

CONFIG_SERIAL_CPM_CONSOLE=y

CONFIG_EXT2_FS=y

CONFIG_EXT4_FS=y

CONFIG_PROC_KCORE=y

CONFIG_TMPFS=y

CONFIG_NFS_FS=y

CONFIG_ROOT_NFS=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_MUTEXES=y