Commit 3ae6156e authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: msm8998-mtp: Merge and fix up the DT 



Merge the two DT files into one, sort the nodes and fix up a couple of style
incoherencies by adding some newlines, removing some, sorting properties etc.

Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430162353.607709-14-konrad.dybcio@somainline.org
parent d0eaf412

arch/arm64/boot/dts/qcom/msm8998-mtp.dts

+440 −1
Original line number Diff line number Diff line
@@ -3,11 +3,450 @@ 


/dts-v1/;



#include "msm8998-mtp.dtsi"

#include "msm8998.dtsi"

#include "pm8005.dtsi"

#include "pm8998.dtsi"

#include "pmi8998.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";

	compatible = "qcom,msm8998-mtp";



	qcom,board-id = <8 0>;



	aliases {

		serial0 = &blsp2_uart1;

		serial1 = &blsp1_uart3;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	vph_pwr: vph-pwr-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vph_pwr";

		regulator-always-on;

		regulator-boot-on;

	};

};



&blsp1_uart3 {

	status = "okay";



	bluetooth {

		compatible = "qcom,wcn3990-bt";



		vddio-supply = <&vreg_s4a_1p8>;

		vddxo-supply = <&vreg_l7a_1p8>;

		vddrf-supply = <&vreg_l17a_1p3>;

		vddch0-supply = <&vreg_l25a_3p3>;

		max-speed = <3200000>;

	};

};



&blsp1_uart3_on {

	rx {

		/delete-property/ bias-disable;

		/*

		 * Configure a pull-up on 45 (RX). This is needed to

		 * avoid garbage data when the TX pin of the Bluetooth

		 * module is in tri-state (module powered off or not

		 * driving the signal yet).

		 */

		bias-pull-up;

	};



	cts {

		/delete-property/ bias-disable;

		/*

		 * Configure a pull-down on 47 (CTS) to match the pull

		 * of the Bluetooth module.

		 */

		bias-pull-down;

	};

};



&blsp2_uart1 {

	status = "okay";

};



&etf {

	status = "okay";

};



&etm1 {

	status = "okay";

};



&etm2 {

	status = "okay";

};



&etm3 {

	status = "okay";

};



&etm4 {

	status = "okay";

};



&etm5 {

	status = "okay";

};



&etm6 {

	status = "okay";

};



&etm7 {

	status = "okay";

};



&etm8 {

	status = "okay";

};



&etr {

	status = "okay";

};



&funnel1 {

	status = "okay";

};



&funnel2 {

	status = "okay";

};



&funnel3 {

	status = "okay";

};



&funnel4 {

	// FIXME: Figure out why clock late_initcall crashes the board with

	// this enabled.

	// status = "okay";

};



&funnel5 {

	// FIXME: Figure out why clock late_initcall crashes the board with

	// this enabled.

	// status = "okay";

};



&pcie0 {

	status = "okay";

};



&pcie_phy {

	status = "okay";

};



&pm8005_regulators {

	vdd_s1-supply = <&vph_pwr>;



	pm8005_s1: s1 { /* VDD_GFX supply */

		regulator-min-microvolt = <524000>;

		regulator-max-microvolt = <1100000>;

		regulator-enable-ramp-delay = <500>;



		/* Hack until we rig up the gpu consumer */

		regulator-always-on;

	};

};



&qusb2phy {

	status = "okay";



	vdda-pll-supply = <&vreg_l12a_1p8>;

	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;

};



&replicator1 {

	status = "okay";

};



&rpm_requests {

	pm8998-regulators {

		compatible = "qcom,rpm-pm8998-regulators";



		vdd_s1-supply = <&vph_pwr>;

		vdd_s2-supply = <&vph_pwr>;

		vdd_s3-supply = <&vph_pwr>;

		vdd_s4-supply = <&vph_pwr>;

		vdd_s5-supply = <&vph_pwr>;

		vdd_s6-supply = <&vph_pwr>;

		vdd_s7-supply = <&vph_pwr>;

		vdd_s8-supply = <&vph_pwr>;

		vdd_s9-supply = <&vph_pwr>;

		vdd_s10-supply = <&vph_pwr>;

		vdd_s11-supply = <&vph_pwr>;

		vdd_s12-supply = <&vph_pwr>;

		vdd_s13-supply = <&vph_pwr>;

		vdd_l1_l27-supply = <&vreg_s7a_1p025>;

		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;

		vdd_l3_l11-supply = <&vreg_s7a_1p025>;

		vdd_l4_l5-supply = <&vreg_s7a_1p025>;

		vdd_l6-supply = <&vreg_s5a_2p04>;

		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;

		vdd_l9-supply = <&vreg_bob>;

		vdd_l10_l23_l25-supply = <&vreg_bob>;

		vdd_l13_l19_l21-supply = <&vreg_bob>;

		vdd_l16_l28-supply = <&vreg_bob>;

		vdd_l18_l22-supply = <&vreg_bob>;

		vdd_l20_l24-supply = <&vreg_bob>;

		vdd_l26-supply = <&vreg_s3a_1p35>;

		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;



		vreg_s3a_1p35: s3 {

			regulator-min-microvolt = <1352000>;

			regulator-max-microvolt = <1352000>;

		};



		vreg_s4a_1p8: s4 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-allow-set-load;

		};



		vreg_s5a_2p04: s5 {

			regulator-min-microvolt = <1904000>;

			regulator-max-microvolt = <2040000>;

		};



		vreg_s7a_1p025: s7 {

			regulator-min-microvolt = <900000>;

			regulator-max-microvolt = <1028000>;

		};



		vreg_l1a_0p875: l1 {

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

		};



		vreg_l2a_1p2: l2 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

		};



		vreg_l3a_1p0: l3 {

			regulator-min-microvolt = <1000000>;

			regulator-max-microvolt = <1000000>;

		};



		vreg_l5a_0p8: l5 {

			regulator-min-microvolt = <800000>;

			regulator-max-microvolt = <800000>;

		};



		vreg_l6a_1p8: l6 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <1808000>;

		};



		vreg_l7a_1p8: l7 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		vreg_l8a_1p2: l8 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

		};



		vreg_l9a_1p8: l9 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <2960000>;

		};



		vreg_l10a_1p8: l10 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <2960000>;

		};



		vreg_l11a_1p0: l11 {

			regulator-min-microvolt = <1000000>;

			regulator-max-microvolt = <1000000>;

		};



		vreg_l12a_1p8: l12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		vreg_l13a_2p95: l13 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <2960000>;

		};



		vreg_l14a_1p88: l14 {

			regulator-min-microvolt = <1880000>;

			regulator-max-microvolt = <1880000>;

		};



		vreg_l15a_1p8: l15 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		vreg_l16a_2p7: l16 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2704000>;

		};



		vreg_l17a_1p3: l17 {

			regulator-min-microvolt = <1304000>;

			regulator-max-microvolt = <1304000>;

		};



		vreg_l18a_2p7: l18 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2704000>;

		};



		vreg_l19a_3p0: l19 {

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3008000>;

		};



		vreg_l20a_2p95: l20 {

			regulator-min-microvolt = <2960000>;

			regulator-max-microvolt = <2960000>;

			regulator-allow-set-load;

		};



		vreg_l21a_2p95: l21 {

			regulator-min-microvolt = <2960000>;

			regulator-max-microvolt = <2960000>;

			regulator-system-load = <800000>;

			regulator-allow-set-load;

		};



		vreg_l22a_2p85: l22 {

			regulator-min-microvolt = <2864000>;

			regulator-max-microvolt = <2864000>;

		};



		vreg_l23a_3p3: l23 {

			regulator-min-microvolt = <3312000>;

			regulator-max-microvolt = <3312000>;

		};



		vreg_l24a_3p075: l24 {

			regulator-min-microvolt = <3088000>;

			regulator-max-microvolt = <3088000>;

		};



		vreg_l25a_3p3: l25 {

			regulator-min-microvolt = <3104000>;

			regulator-max-microvolt = <3312000>;

		};



		vreg_l26a_1p2: l26 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-allow-set-load;

		};



		vreg_l28_3p0: l28 {

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3008000>;

		};



		vreg_lvs1a_1p8: lvs1 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		vreg_lvs2a_1p8: lvs2 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



	};



	pmi8998-regulators {

		compatible = "qcom,rpm-pmi8998-regulators";



		vdd_bob-supply = <&vph_pwr>;



		vreg_bob: bob {

			regulator-min-microvolt = <3312000>;

			regulator-max-microvolt = <3600000>;

		};

	};

};



&remoteproc_adsp {

	status = "okay";

};



&remoteproc_mss {

	status = "okay";

};



&remoteproc_slpi {

	status = "okay";

};



&tlmm {

	gpio-reserved-ranges = <0 4>, <81 4>;

};



&sdhc2 {

	status = "okay";

	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;



	vmmc-supply = <&vreg_l21a_2p95>;

	vqmmc-supply = <&vreg_l13a_2p95>;



	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sdc2_on &sdc2_cd>;

	pinctrl-1 = <&sdc2_off &sdc2_cd>;

};



&stm {

	status = "okay";

};



&ufshc {

	status = "okay";

	vcc-supply = <&vreg_l20a_2p95>;

	vccq-supply = <&vreg_l26a_1p2>;

	vccq2-supply = <&vreg_s4a_1p8>;

	vcc-max-microamp = <750000>;

	vccq-max-microamp = <560000>;

	vccq2-max-microamp = <750000>;

};



&ufsphy {

	status = "okay";

	vdda-phy-supply = <&vreg_l1a_0p875>;

	vdda-pll-supply = <&vreg_l2a_1p2>;

	vddp-ref-clk-supply = <&vreg_l26a_1p2>;

};



&usb3 {

	status = "okay";

};



&usb3_dwc3 {

	dr_mode = "host"; /* Force to host until we have Type-C hooked up */

};



&usb3phy {

	status = "okay";



	vdda-phy-supply = <&vreg_l1a_0p875>;

	vdda-pll-supply = <&vreg_l2a_1p2>;

};



&wifi {

	status = "okay";



	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;

	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;

	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;

	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;

};

arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi

deleted100644 → 0
+0 −421
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */



#include "msm8998.dtsi"

#include "pm8005.dtsi"

#include "pm8998.dtsi"

#include "pmi8998.dtsi"



/ {

	aliases {

		serial0 = &blsp2_uart1;

		serial1 = &blsp1_uart3;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	vph_pwr: vph-pwr-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vph_pwr";

		regulator-always-on;

		regulator-boot-on;

	};

};



&blsp1_uart3 {

	status = "okay";



	bluetooth {

		compatible = "qcom,wcn3990-bt";



		vddio-supply = <&vreg_s4a_1p8>;

		vddxo-supply = <&vreg_l7a_1p8>;

		vddrf-supply = <&vreg_l17a_1p3>;

		vddch0-supply = <&vreg_l25a_3p3>;

		max-speed = <3200000>;

	};

};



&blsp2_uart1 {

	status = "okay";

};



&etf {

	status = "okay";

};



&etm1 {

	status = "okay";

};



&etm2 {

	status = "okay";

};



&etm3 {

	status = "okay";

};



&etm4 {

	status = "okay";

};



&etm5 {

	status = "okay";

};



&etm6 {

	status = "okay";

};



&etm7 {

	status = "okay";

};



&etm8 {

	status = "okay";

};



&etr {

	status = "okay";

};



&funnel1 {

	status = "okay";

};



&funnel2 {

	status = "okay";

};



&funnel3 {

	status = "okay";

};



&funnel4 {

	// FIXME: Figure out why clock late_initcall crashes the board with

	// this enabled.

	// status = "okay";

};



&funnel5 {

	// FIXME: Figure out why clock late_initcall crashes the board with

	// this enabled.

	// status = "okay";

};



&pcie0 {

	status = "okay";

};



&pcie_phy {

	status = "okay";

};



&pm8005_lsid1 {

	pm8005-regulators {

		compatible = "qcom,pm8005-regulators";



		vdd_s1-supply = <&vph_pwr>;



		pm8005_s1: s1 { /* VDD_GFX supply */

			regulator-min-microvolt = <524000>;

			regulator-max-microvolt = <1100000>;

			regulator-enable-ramp-delay = <500>;



			/* hack until we rig up the gpu consumer */

			regulator-always-on;

		};

	};

};



&qusb2phy {

	status = "okay";



	vdda-pll-supply = <&vreg_l12a_1p8>;

	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;

};



&replicator1 {

	status = "okay";

};



&rpm_requests {

	pm8998-regulators {

		compatible = "qcom,rpm-pm8998-regulators";



		vdd_s1-supply = <&vph_pwr>;

		vdd_s2-supply = <&vph_pwr>;

		vdd_s3-supply = <&vph_pwr>;

		vdd_s4-supply = <&vph_pwr>;

		vdd_s5-supply = <&vph_pwr>;

		vdd_s6-supply = <&vph_pwr>;

		vdd_s7-supply = <&vph_pwr>;

		vdd_s8-supply = <&vph_pwr>;

		vdd_s9-supply = <&vph_pwr>;

		vdd_s10-supply = <&vph_pwr>;

		vdd_s11-supply = <&vph_pwr>;

		vdd_s12-supply = <&vph_pwr>;

		vdd_s13-supply = <&vph_pwr>;

		vdd_l1_l27-supply = <&vreg_s7a_1p025>;

		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;

		vdd_l3_l11-supply = <&vreg_s7a_1p025>;

		vdd_l4_l5-supply = <&vreg_s7a_1p025>;

		vdd_l6-supply = <&vreg_s5a_2p04>;

		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;

		vdd_l9-supply = <&vreg_bob>;

		vdd_l10_l23_l25-supply = <&vreg_bob>;

		vdd_l13_l19_l21-supply = <&vreg_bob>;

		vdd_l16_l28-supply = <&vreg_bob>;

		vdd_l18_l22-supply = <&vreg_bob>;

		vdd_l20_l24-supply = <&vreg_bob>;

		vdd_l26-supply = <&vreg_s3a_1p35>;

		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;



		vreg_s3a_1p35: s3 {

			regulator-min-microvolt = <1352000>;

			regulator-max-microvolt = <1352000>;

		};

		vreg_s4a_1p8: s4 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-allow-set-load;

		};

		vreg_s5a_2p04: s5 {

			regulator-min-microvolt = <1904000>;

			regulator-max-microvolt = <2040000>;

		};

		vreg_s7a_1p025: s7 {

			regulator-min-microvolt = <900000>;

			regulator-max-microvolt = <1028000>;

		};

		vreg_l1a_0p875: l1 {

			regulator-min-microvolt = <880000>;

			regulator-max-microvolt = <880000>;

		};

		vreg_l2a_1p2: l2 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

		};

		vreg_l3a_1p0: l3 {

			regulator-min-microvolt = <1000000>;

			regulator-max-microvolt = <1000000>;

		};

		vreg_l5a_0p8: l5 {

			regulator-min-microvolt = <800000>;

			regulator-max-microvolt = <800000>;

		};

		vreg_l6a_1p8: l6 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <1808000>;

		};

		vreg_l7a_1p8: l7 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};

		vreg_l8a_1p2: l8 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

		};

		vreg_l9a_1p8: l9 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <2960000>;

		};

		vreg_l10a_1p8: l10 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <2960000>;

		};

		vreg_l11a_1p0: l11 {

			regulator-min-microvolt = <1000000>;

			regulator-max-microvolt = <1000000>;

		};

		vreg_l12a_1p8: l12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};

		vreg_l13a_2p95: l13 {

			regulator-min-microvolt = <1808000>;

			regulator-max-microvolt = <2960000>;

		};

		vreg_l14a_1p88: l14 {

			regulator-min-microvolt = <1880000>;

			regulator-max-microvolt = <1880000>;

		};

		vreg_l15a_1p8: l15 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};

		vreg_l16a_2p7: l16 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2704000>;

		};

		vreg_l17a_1p3: l17 {

			regulator-min-microvolt = <1304000>;

			regulator-max-microvolt = <1304000>;

		};

		vreg_l18a_2p7: l18 {

			regulator-min-microvolt = <2704000>;

			regulator-max-microvolt = <2704000>;

		};

		vreg_l19a_3p0: l19 {

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3008000>;

		};

		vreg_l20a_2p95: l20 {

			regulator-min-microvolt = <2960000>;

			regulator-max-microvolt = <2960000>;

			regulator-allow-set-load;

		};

		vreg_l21a_2p95: l21 {

			regulator-min-microvolt = <2960000>;

			regulator-max-microvolt = <2960000>;

			regulator-allow-set-load;

			regulator-system-load = <800000>;

		};

		vreg_l22a_2p85: l22 {

			regulator-min-microvolt = <2864000>;

			regulator-max-microvolt = <2864000>;

		};

		vreg_l23a_3p3: l23 {

			regulator-min-microvolt = <3312000>;

			regulator-max-microvolt = <3312000>;

		};

		vreg_l24a_3p075: l24 {

			regulator-min-microvolt = <3088000>;

			regulator-max-microvolt = <3088000>;

		};

		vreg_l25a_3p3: l25 {

			regulator-min-microvolt = <3104000>;

			regulator-max-microvolt = <3312000>;

		};

		vreg_l26a_1p2: l26 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

			regulator-allow-set-load;

		};

		vreg_l28_3p0: l28 {

			regulator-min-microvolt = <3008000>;

			regulator-max-microvolt = <3008000>;

		};



		vreg_lvs1a_1p8: lvs1 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		vreg_lvs2a_1p8: lvs2 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



	};



	pmi8998-regulators {

		compatible = "qcom,rpm-pmi8998-regulators";



		vdd_bob-supply = <&vph_pwr>;



		vreg_bob: bob {

			regulator-min-microvolt = <3312000>;

			regulator-max-microvolt = <3600000>;

		};

	};

};



&remoteproc_adsp {

	status = "okay";

};



&remoteproc_mss {

	status = "okay";

};



&remoteproc_slpi {

	status = "okay";

};



&tlmm {

	gpio-reserved-ranges = <0 4>, <81 4>;

};



&sdhc2 {

	status = "okay";

	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;



	vmmc-supply = <&vreg_l21a_2p95>;

	vqmmc-supply = <&vreg_l13a_2p95>;



	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sdc2_on &sdc2_cd>;

	pinctrl-1 = <&sdc2_off &sdc2_cd>;

};



&stm {

	status = "okay";

};



&ufshc {

	status = "okay";

	vcc-supply = <&vreg_l20a_2p95>;

	vccq-supply = <&vreg_l26a_1p2>;

	vccq2-supply = <&vreg_s4a_1p8>;

	vcc-max-microamp = <750000>;

	vccq-max-microamp = <560000>;

	vccq2-max-microamp = <750000>;

};



&ufsphy {

	status = "okay";

	vdda-phy-supply = <&vreg_l1a_0p875>;

	vdda-pll-supply = <&vreg_l2a_1p2>;

	vddp-ref-clk-supply = <&vreg_l26a_1p2>;

};



&usb3 {

	status = "okay";

};



&usb3_dwc3 {

	dr_mode = "host"; /* Force to host until we have Type-C hooked up */

};



&usb3phy {

	status = "okay";



	vdda-phy-supply = <&vreg_l1a_0p875>;

	vdda-pll-supply = <&vreg_l2a_1p2>;

};



&wifi {

	status = "okay";



	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;

	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;

	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;

	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;

};



/* PINCTRL - board-specific pinctrl */

&blsp1_uart3_on {

	rx {

		/delete-property/ bias-disable;

		/*

		 * Configure a pull-up on 45 (RX). This is needed to

		 * avoid garbage data when the TX pin of the Bluetooth

		 * module is in tri-state (module powered off or not

		 * driving the signal yet).

		 */

		bias-pull-up;

	};



	cts {

		/delete-property/ bias-disable;

		/*

		 * Configure a pull-down on 47 (CTS) to match the pull

		 * of the Bluetooth module.

		 */

		bias-pull-down;

	};

};