Commit 44a678b9 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: ni_atmio: fix block comments 



Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 26994fd5

drivers/staging/comedi/drivers/ni_atmio.c

+78 −87
Original line number Diff line number Diff line 
/*

    comedi/drivers/ni_atmio.c

    Hardware driver for NI AT-MIO E series cards



    COMEDI - Linux Control and Measurement Device Interface

    Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org>



    This program is free software; you can redistribute it and/or modify

    it under the terms of the GNU General Public License as published by

    the Free Software Foundation; either version 2 of the License, or

    (at your option) any later version.



    This program is distributed in the hope that it will be useful,

    but WITHOUT ANY WARRANTY; without even the implied warranty of

    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

    GNU General Public License for more details.

 * Comedi driver for NI AT-MIO E series cards

 *

 * COMEDI - Linux Control and Measurement Device Interface

 * Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/*

Driver: ni_atmio

Description: National Instruments AT-MIO-E series

Author: ds

Devices: [National Instruments] AT-MIO-16E-1 (ni_atmio),

  AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,

  AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10

Status: works

Updated: Thu May  1 20:03:02 CDT 2003



The driver has 2.6 kernel isapnp support, and

will automatically probe for a supported board if the

I/O base is left unspecified with comedi_config.

However, many of

the isapnp id numbers are unknown.  If your board is not

recognized, please send the output of 'cat /proc/isapnp'

(you may need to modprobe the isa-pnp module for

/proc/isapnp to exist) so the

id numbers for your board can be added to the driver.



Otherwise, you can use the isapnptools package to configure

your board.  Use isapnp to

configure the I/O base and IRQ for the board, and then pass

the same values as

parameters in comedi_config.  A sample isapnp.conf file is included

in the etc/ directory of Comedilib.



Comedilib includes a utility to autocalibrate these boards.  The

boards seem to boot into a state where the all calibration DACs

are at one extreme of their range, thus the default calibration

is terrible.  Calibration at boot is strongly encouraged.



To use the extended digital I/O on some of the boards, enable the

8255 driver when configuring the Comedi source tree.



External triggering is supported for some events.  The channel index

(scan_begin_arg, etc.) maps to PFI0 - PFI9.



Some of the more esoteric triggering possibilities of these boards

are not supported.

 * Driver: ni_atmio

 * Description: National Instruments AT-MIO-E series

 * Author: ds

 * Devices: [National Instruments] AT-MIO-16E-1 (ni_atmio),

 *   AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,

 *   AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10

 * Status: works

 * Updated: Thu May  1 20:03:02 CDT 2003

 *

 * The driver has 2.6 kernel isapnp support, and will automatically probe for

 * a supported board if the I/O base is left unspecified with comedi_config.

 * However, many of the isapnp id numbers are unknown. If your board is not

 * recognized, please send the output of 'cat /proc/isapnp' (you may need to

 * modprobe the isa-pnp module for /proc/isapnp to exist) so the id numbers

 * for your board can be added to the driver.

 *

 * Otherwise, you can use the isapnptools package to configure your board.

 * Use isapnp to configure the I/O base and IRQ for the board, and then pass

 * the same values as parameters in comedi_config. A sample isapnp.conf file

 * is included in the etc/ directory of Comedilib.

 *

 * Comedilib includes a utility to autocalibrate these boards. The boards

 * seem to boot into a state where the all calibration DACs are at one

 * extreme of their range, thus the default calibration is terrible.

 * Calibration at boot is strongly encouraged.

 *

 * To use the extended digital I/O on some of the boards, enable the

 * 8255 driver when configuring the Comedi source tree.

 *

 * External triggering is supported for some events. The channel index

 * (scan_begin_arg, etc.) maps to PFI0 - PFI9.

 *

 * Some of the more esoteric triggering possibilities of these boards are

 * not supported.

 */

/*

	The real guts of the driver is in ni_mio_common.c, which is included

	both here and in ni_pcimio.c



	Interrupt support added by Truxton Fulton <trux@truxton.com>



	References for specifications:



	   340747b.pdf  Register Level Programmer Manual (obsolete)

	   340747c.pdf  Register Level Programmer Manual (new)

	   DAQ-STC reference manual



	Other possibly relevant info:



	   320517c.pdf  User manual (obsolete)

	   320517f.pdf  User manual (new)

	   320889a.pdf  delete

	   320906c.pdf  maximum signal ratings

	   321066a.pdf  about 16x

	   321791a.pdf  discontinuation of at-mio-16e-10 rev. c

	   321808a.pdf  about at-mio-16e-10 rev P

	   321837a.pdf  discontinuation of at-mio-16de-10 rev d

	   321838a.pdf  about at-mio-16de-10 rev N



	ISSUES:



	need to deal with external reference for DAC, and other DAC

	properties in board properties



	deal with at-mio-16de-10 revision D to N changes, etc.



/*

 * The real guts of the driver is in ni_mio_common.c, which is included

 * both here and in ni_pcimio.c

 *

 * Interrupt support added by Truxton Fulton <trux@truxton.com>

 *

 * References for specifications:

 *	340747b.pdf  Register Level Programmer Manual (obsolete)

 *	340747c.pdf  Register Level Programmer Manual (new)

 *		     DAQ-STC reference manual

 *

 * Other possibly relevant info:

 *	320517c.pdf  User manual (obsolete)

 *	320517f.pdf  User manual (new)

 *	320889a.pdf  delete

 *	320906c.pdf  maximum signal ratings

 *	321066a.pdf  about 16x

 *	321791a.pdf  discontinuation of at-mio-16e-10 rev. c

 *	321808a.pdf  about at-mio-16e-10 rev P

 *	321837a.pdf  discontinuation of at-mio-16de-10 rev d

 *	321838a.pdf  about at-mio-16de-10 rev N

 *

 * ISSUES:

 * - need to deal with external reference for DAC, and other DAC

 *   properties in board properties

 * - deal with at-mio-16de-10 revision D to N changes, etc.

 */



#include <linux/module.h>