Commit 454496fd authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville
Browse files

ssb: define boardflags 



They are SPROM specific, so all should be defined in ssb code.

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent f749b946

include/linux/ssb/ssb_regs.h

+40 −0
Original line number Diff line number Diff line
@@ -462,6 +462,46 @@ 
#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */

#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */



/* Values for boardflags_lo read from SPROM */

#define SSB_BFL_BTCOEXIST		0x0001	/* implements Bluetooth coexistance */

#define SSB_BFL_PACTRL			0x0002	/* GPIO 9 controlling the PA */

#define SSB_BFL_AIRLINEMODE		0x0004	/* implements GPIO 13 radio disable indication */

#define SSB_BFL_RSSI			0x0008	/* software calculates nrssi slope. */

#define SSB_BFL_ENETSPI			0x0010	/* has ephy roboswitch spi */

#define SSB_BFL_XTAL_NOSLOW		0x0020	/* no slow clock available */

#define SSB_BFL_CCKHIPWR		0x0040	/* can do high power CCK transmission */

#define SSB_BFL_ENETADM			0x0080	/* has ADMtek switch */

#define SSB_BFL_ENETVLAN		0x0100	/* can do vlan */

#define SSB_BFL_AFTERBURNER		0x0200	/* supports Afterburner mode */

#define SSB_BFL_NOPCI			0x0400	/* board leaves PCI floating */

#define SSB_BFL_FEM			0x0800	/* supports the Front End Module */

#define SSB_BFL_EXTLNA			0x1000	/* has an external LNA */

#define SSB_BFL_HGPA			0x2000	/* had high gain PA */

#define SSB_BFL_BTCMOD			0x4000	/* BFL_BTCOEXIST is given in alternate GPIOs */

#define SSB_BFL_ALTIQ			0x8000	/* alternate I/Q settings */



/* Values for boardflags_hi read from SPROM */

#define SSB_BFH_NOPA			0x0001	/* has no PA */

#define SSB_BFH_RSSIINV			0x0002	/* RSSI uses positive slope (not TSSI) */

#define SSB_BFH_PAREF			0x0004	/* uses the PARef LDO */

#define SSB_BFH_3TSWITCH		0x0008	/* uses a triple throw switch shared with bluetooth */

#define SSB_BFH_PHASESHIFT		0x0010	/* can support phase shifter */

#define SSB_BFH_BUCKBOOST		0x0020	/* has buck/booster */

#define SSB_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna with bluetooth */



/* Values for boardflags2_lo read from SPROM */

#define SSB_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */

#define SSB_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */

#define SSB_BFL2_TXPWRCTRL_EN 		0x0004	/* permits enabling TX Power Control */

#define SSB_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */

#define SSB_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */

#define SSB_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */

#define SSB_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */

#define SSB_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */

#define SSB_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */

#define SSB_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */

#define SSB_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */



/* Values for SSB_SPROM1_BINF_CCODE */

enum {

	SSB_SPROM1CCODE_WORLD = 0,