Commit 64a59c39 authored by Philippe Schenker's avatar Philippe Schenker Committed by Shawn Guo
Browse files

arm64: dts: imx8mp-verdin-dev: Do not include dahlia dtsi 



Follow the change that has been done on imx8mm-verdin-dev.dtsi and
remove the include from dahlia to be consistent. Put back all nodes that
previously had been included.

Signed-off-by: default avatarPhilippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 99d7ad96

arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi

+114 −2
Original line number Diff line number Diff line
@@ -3,8 +3,6 @@ 
 * Copyright 2022 Toradex

 */



#include "imx8mp-verdin-dahlia.dtsi"



/ {

	/* TODO: Audio Codec */
@@ -21,16 +19,99 @@ reg_eth2phy: regulator-eth2phy { 
	};

};



&backlight {

	power-supply = <&reg_3p3v>;

};



/* Verdin SPI_1 */

&ecspi1 {

	status = "okay";

};



/* EEPROM on display adapter boards */

&eeprom_display_adapter {

	status = "okay";

};



/* EEPROM on Verdin Development board */

&eeprom_carrier_board {

	status = "okay";

};



&eqos {

	status = "okay";

};



&fec {

	phy-supply = <&reg_eth2phy>;

	status = "okay";

};



&flexcan1 {

	status = "okay";

};



&flexcan2 {

	status = "okay";

};



/* Verdin QSPI_1 */

&flexspi {

	status = "okay";

};



&gpio_expander_21 {

	status = "okay";

	vcc-supply = <&reg_1p8v>;

};



/* Current measurement into module VCC */

&hwmon {

	status = "okay";

};



&hwmon_temp {

	vs-supply = <&reg_1p8v>;

	status = "okay";

};



/* Verdin I2C_2_DSI */

&i2c2 {

	status = "okay";

};



&i2c3 {

	status = "okay";

};



/* Verdin I2C_1 */

&i2c4 {

	status = "okay";



	/* TODO: Audio Codec */

};



/* TODO: Verdin PCIE_1 */



/* Verdin PWM_1 */

&pwm1 {

	status = "okay";

};



/* Verdin PWM_2 */

&pwm2 {

	status = "okay";

};



/* Verdin PWM_3_DSI */

&pwm3 {

	status = "okay";

};



&reg_usdhc2_vmmc {

	vin-supply = <&reg_3p3v>;

};



/* TODO: Verdin I2C_1 with Audio Codec */



/* Verdin UART_1, connector X50 through RS485 transceiver */
@@ -38,9 +119,40 @@ &uart1 { 
	linux,rs485-enabled-at-boot-time;

	rs485-rts-active-low;

	rs485-rx-during-tx;

	status = "okay";

};



/* Verdin UART_2 */

&uart2 {

	status = "okay";

};



/* Verdin UART_3, used as the Linux Console */

&uart3 {

	status = "okay";

};



/* Verdin USB_1 */

&usb3_0 {

	status = "okay";

};



&usb3_phy0 {

	status = "okay";

};



/* Verdin USB_2 */

&usb3_1 {

	fsl,permanently-attached;

	status = "okay";

};



&usb3_phy1 {

	status = "okay";

};



/* Limit frequency on dev board due to long traces and bad signal integrity */

&usdhc2 {

	max-frequency = <100000000>;

	status = "okay";

};