Staging: hv: move HvStatus.h into hv_api.h (65452d1f) · Commits · jan.koester / Linux

drivers/staging/hv/Hv.h

+0 −1

Original line number	Diff line number	Diff line
		@@ -25,7 +25,6 @@
		#ifndef __HV_H__
		#define __HV_H__

		#include "include/HvStatus.h"
		#include "hv_api.h"

		enum {

drivers/staging/hv/hv_api.h

+485 −0

Original line number	Diff line number	Diff line
		@@ -23,6 +23,491 @@
		#ifndef __HV_API_H
		#define __HV_API_H


		/* Status codes for hypervisor operations. */

		/*
		* HV_STATUS_SUCCESS
		* The specified hypercall succeeded
		*/
		#define HV_STATUS_SUCCESS ((u16)0x0000)

		/*
		* HV_STATUS_INVALID_HYPERCALL_CODE
		* The hypervisor does not support the operation because the specified
		* hypercall code is not supported.
		*/
		#define HV_STATUS_INVALID_HYPERCALL_CODE ((u16)0x0002)

		/*
		* HV_STATUS_INVALID_HYPERCALL_INPUT
		* The hypervisor does not support the operation because the encoding for the
		* hypercall input register is not supported.
		*/
		#define HV_STATUS_INVALID_HYPERCALL_INPUT ((u16)0x0003)

		/*
		* HV_STATUS_INVALID_ALIGNMENT
		* The hypervisor could not perform the operation beacuse a parameter has an
		* invalid alignment.
		*/
		#define HV_STATUS_INVALID_ALIGNMENT ((u16)0x0004)

		/*
		* HV_STATUS_INVALID_PARAMETER
		* The hypervisor could not perform the operation beacuse an invalid parameter
		* was specified.
		*/
		#define HV_STATUS_INVALID_PARAMETER ((u16)0x0005)

		/*
		* HV_STATUS_ACCESS_DENIED
		* Access to the specified object was denied.
		*/
		#define HV_STATUS_ACCESS_DENIED ((u16)0x0006)

		/*
		* HV_STATUS_INVALID_PARTITION_STATE
		* The hypervisor could not perform the operation because the partition is
		* entering or in an invalid state.
		*/
		#define HV_STATUS_INVALID_PARTITION_STATE ((u16)0x0007)

		/*
		* HV_STATUS_OPERATION_DENIED
		* The operation is not allowed in the current state.
		*/
		#define HV_STATUS_OPERATION_DENIED ((u16)0x0008)

		/*
		* HV_STATUS_UNKNOWN_PROPERTY
		* The hypervisor does not recognize the specified partition property.
		*/
		#define HV_STATUS_UNKNOWN_PROPERTY ((u16)0x0009)

		/*
		* HV_STATUS_PROPERTY_VALUE_OUT_OF_RANGE
		* The specified value of a partition property is out of range or violates an
		* invariant.
		*/
		#define HV_STATUS_PROPERTY_VALUE_OUT_OF_RANGE ((u16)0x000A)

		/*
		* HV_STATUS_INSUFFICIENT_MEMORY
		* There is not enough memory in the hypervisor pool to complete the operation.
		*/
		#define HV_STATUS_INSUFFICIENT_MEMORY ((u16)0x000B)

		/*
		* HV_STATUS_PARTITION_TOO_DEEP
		* The maximum partition depth has been exceeded for the partition hierarchy.
		*/
		#define HV_STATUS_PARTITION_TOO_DEEP ((u16)0x000C)

		/*
		* HV_STATUS_INVALID_PARTITION_ID
		* A partition with the specified partition Id does not exist.
		*/
		#define HV_STATUS_INVALID_PARTITION_ID ((u16)0x000D)

		/*
		* HV_STATUS_INVALID_VP_INDEX
		* The hypervisor could not perform the operation because the specified VP
		* index is invalid.
		*/
		#define HV_STATUS_INVALID_VP_INDEX ((u16)0x000E)

		/*
		* HV_STATUS_NOT_FOUND
		* The iteration is complete; no addition items in the iteration could be
		* found.
		*/
		#define HV_STATUS_NOT_FOUND ((u16)0x0010)

		/*
		* HV_STATUS_INVALID_PORT_ID
		* The hypervisor could not perform the operation because the specified port
		* identifier is invalid.
		*/
		#define HV_STATUS_INVALID_PORT_ID ((u16)0x0011)

		/*
		* HV_STATUS_INVALID_CONNECTION_ID
		* The hypervisor could not perform the operation because the specified
		* connection identifier is invalid.
		*/
		#define HV_STATUS_INVALID_CONNECTION_ID ((u16)0x0012)

		/*
		* HV_STATUS_INSUFFICIENT_BUFFERS
		* You did not supply enough message buffers to send a message.
		*/
		#define HV_STATUS_INSUFFICIENT_BUFFERS ((u16)0x0013)

		/*
		* HV_STATUS_NOT_ACKNOWLEDGED
		* The previous virtual interrupt has not been acknowledged.
		*/
		#define HV_STATUS_NOT_ACKNOWLEDGED ((u16)0x0014)

		/*
		* HV_STATUS_INVALID_VP_STATE
		* A virtual processor is not in the correct state for the performance of the
		* indicated operation.
		*/
		#define HV_STATUS_INVALID_VP_STATE ((u16)0x0015)

		/*
		* HV_STATUS_ACKNOWLEDGED
		* The previous virtual interrupt has already been acknowledged.
		*/
		#define HV_STATUS_ACKNOWLEDGED ((u16)0x0016)

		/*
		* HV_STATUS_INVALID_SAVE_RESTORE_STATE
		* The indicated partition is not in a valid state for saving or restoring.
		*/
		#define HV_STATUS_INVALID_SAVE_RESTORE_STATE ((u16)0x0017)

		/*
		* HV_STATUS_INVALID_SYNIC_STATE
		* The hypervisor could not complete the operation because a required feature
		* of the synthetic interrupt controller (SynIC) was disabled.
		*/
		#define HV_STATUS_INVALID_SYNIC_STATE ((u16)0x0018)

		/*
		* HV_STATUS_OBJECT_IN_USE
		* The hypervisor could not perform the operation because the object or value
		* was either already in use or being used for a purpose that would not permit
		* completing the operation.
		*/
		#define HV_STATUS_OBJECT_IN_USE ((u16)0x0019)

		/*
		* HV_STATUS_INVALID_PROXIMITY_DOMAIN_INFO
		* The proximity domain information is invalid.
		*/
		#define HV_STATUS_INVALID_PROXIMITY_DOMAIN_INFO ((u16)0x001A)

		/*
		* HV_STATUS_NO_DATA
		* An attempt to retrieve debugging data failed because none was available.
		*/
		#define HV_STATUS_NO_DATA ((u16)0x001B)

		/*
		* HV_STATUS_INACTIVE
		* The physical connection being used for debuggging has not recorded any
		* receive activity since the last operation.
		*/
		#define HV_STATUS_INACTIVE ((u16)0x001C)

		/*
		* HV_STATUS_NO_RESOURCES
		* There are not enough resources to complete the operation.
		*/
		#define HV_STATUS_NO_RESOURCES ((u16)0x001D)

		/*
		* HV_STATUS_FEATURE_UNAVAILABLE
		* A hypervisor feature is not available to the user.
		*/
		#define HV_STATUS_FEATURE_UNAVAILABLE ((u16)0x001E)

		/*
		* HV_STATUS_UNSUCCESSFUL
		* {Operation Failed} The requested operation was unsuccessful.
		*/
		#define HV_STATUS_UNSUCCESSFUL ((u16)0x1001)

		/*
		* HV_STATUS_INSUFFICIENT_BUFFER
		* The specified buffer was too small to contain all of the requested data.
		*/
		#define HV_STATUS_INSUFFICIENT_BUFFER ((u16)0x1002)

		/*
		* HV_STATUS_GPA_NOT_PRESENT
		* The guest physical address is not currently associated with a system
		* physical address.
		*/
		#define HV_STATUS_GPA_NOT_PRESENT ((u16)0x1003)

		/*
		* HV_STATUS_GUEST_PAGE_FAULT
		* The operation would have resulted in a page fault in the guest.
		*/
		#define HV_STATUS_GUEST_PAGE_FAULT ((u16)0x1004)

		/*
		* HV_STATUS_RUNDOWN_DISABLED
		* The operation cannot proceed as the rundown object was marked disabled.
		*/
		#define HV_STATUS_RUNDOWN_DISABLED ((u16)0x1005)

		/*
		* HV_STATUS_KEY_ALREADY_EXISTS
		* The entry cannot be added as another entry with the same key already exists.
		*/
		#define HV_STATUS_KEY_ALREADY_EXISTS ((u16)0x1006)

		/*
		* HV_STATUS_GPA_INTERCEPT
		* The operation resulted an intercept on a region of guest physical memory.
		*/
		#define HV_STATUS_GPA_INTERCEPT ((u16)0x1007)

		/*
		* HV_STATUS_GUEST_GENERAL_PROTECTION_FAULT
		* The operation would have resulted in a general protection fault in the
		* guest.
		*/
		#define HV_STATUS_GUEST_GENERAL_PROTECTION_FAULT ((u16)0x1008)

		/*
		* HV_STATUS_GUEST_STACK_FAULT
		* The operation would have resulted in a stack fault in the guest.
		*/
		#define HV_STATUS_GUEST_STACK_FAULT ((u16)0x1009)

		/*
		* HV_STATUS_GUEST_INVALID_OPCODE_FAULT
		* The operation would have resulted in an invalid opcode fault in the guest.
		*/
		#define HV_STATUS_GUEST_INVALID_OPCODE_FAULT ((u16)0x100A)

		/*
		* HV_STATUS_FINALIZE_INCOMPLETE
		* The partition is not completely finalized.
		*/
		#define HV_STATUS_FINALIZE_INCOMPLETE ((u16)0x100B)

		/*
		* HV_STATUS_GUEST_MACHINE_CHECK_ABORT
		* The operation would have resulted in an machine check abort in the guest.
		*/
		#define HV_STATUS_GUEST_MACHINE_CHECK_ABORT ((u16)0x100C)

		/*
		* HV_STATUS_ILLEGAL_OVERLAY_ACCESS
		* An illegal access was attempted to an overlay page.
		*/
		#define HV_STATUS_ILLEGAL_OVERLAY_ACCESS ((u16)0x100D)

		/*
		* HV_STATUS_INSUFFICIENT_SYSTEM_VA
		* There is not enough system VA space available to satisfy the request,
		*/
		#define HV_STATUS_INSUFFICIENT_SYSTEM_VA ((u16)0x100E)

		/*
		* HV_STATUS_VIRTUAL_ADDRESS_NOT_MAPPED
		* The passed virtual address was not mapped in the hypervisor address space.
		*/
		#define HV_STATUS_VIRTUAL_ADDRESS_NOT_MAPPED ((u16)0x100F)

		/*
		* HV_STATUS_NOT_IMPLEMENTED
		* The requested operation is not implemented in this version of the
		* hypervisor.
		*/
		#define HV_STATUS_NOT_IMPLEMENTED ((u16)0x1010)

		/*
		* HV_STATUS_VMX_INSTRUCTION_FAILED
		* The requested VMX instruction failed to complete succesfully.
		*/
		#define HV_STATUS_VMX_INSTRUCTION_FAILED ((u16)0x1011)

		/*
		* HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS
		* The requested VMX instruction failed to complete succesfully indicating
		* status.
		*/
		#define HV_STATUS_VMX_INSTRUCTION_FAILED_WITH_STATUS ((u16)0x1012)

		/*
		* HV_STATUS_MSR_ACCESS_FAILED
		* The requested access to the model specific register failed.
		*/
		#define HV_STATUS_MSR_ACCESS_FAILED ((u16)0x1013)

		/*
		* HV_STATUS_CR_ACCESS_FAILED
		* The requested access to the control register failed.
		*/
		#define HV_STATUS_CR_ACCESS_FAILED ((u16)0x1014)

		/*
		* HV_STATUS_TIMEOUT
		* The specified timeout expired before the operation completed.
		*/
		#define HV_STATUS_TIMEOUT ((u16)0x1016)

		/*
		* HV_STATUS_MSR_INTERCEPT
		* The requested access to the model specific register generated an intercept.
		*/
		#define HV_STATUS_MSR_INTERCEPT ((u16)0x1017)

		/*
		* HV_STATUS_CPUID_INTERCEPT
		* The CPUID instruction generated an intercept.
		*/
		#define HV_STATUS_CPUID_INTERCEPT ((u16)0x1018)

		/*
		* HV_STATUS_REPEAT_INSTRUCTION
		* The current instruction should be repeated and the instruction pointer not
		* advanced.
		*/
		#define HV_STATUS_REPEAT_INSTRUCTION ((u16)0x1019)

		/*
		* HV_STATUS_PAGE_PROTECTION_VIOLATION
		* The current instruction should be repeated and the instruction pointer not
		* advanced.
		*/
		#define HV_STATUS_PAGE_PROTECTION_VIOLATION ((u16)0x101A)

		/*
		* HV_STATUS_PAGE_TABLE_INVALID
		* The current instruction should be repeated and the instruction pointer not
		* advanced.
		*/
		#define HV_STATUS_PAGE_TABLE_INVALID ((u16)0x101B)

		/*
		* HV_STATUS_PAGE_NOT_PRESENT
		* The current instruction should be repeated and the instruction pointer not
		* advanced.
		*/
		#define HV_STATUS_PAGE_NOT_PRESENT ((u16)0x101C)

		/*
		* HV_STATUS_IO_INTERCEPT
		* The requested access to the I/O port generated an intercept.
		*/
		#define HV_STATUS_IO_INTERCEPT ((u16)0x101D)

		/*
		* HV_STATUS_NOTHING_TO_DO
		* There is nothing to do.
		*/
		#define HV_STATUS_NOTHING_TO_DO ((u16)0x101E)

		/*
		* HV_STATUS_THREAD_TERMINATING
		* The requested thread is terminating.
		*/
		#define HV_STATUS_THREAD_TERMINATING ((u16)0x101F)

		/*
		* HV_STATUS_SECTION_ALREADY_CONSTRUCTED
		* The specified section was already constructed.
		*/
		#define HV_STATUS_SECTION_ALREADY_CONSTRUCTED ((u16)0x1020)

		/* HV_STATUS_SECTION_NOT_ALREADY_CONSTRUCTED
		* The specified section was not already constructed.
		*/
		#define HV_STATUS_SECTION_NOT_ALREADY_CONSTRUCTED ((u16)0x1021)

		/*
		* HV_STATUS_PAGE_ALREADY_COMMITTED
		* The specified virtual address was already backed by physical memory.
		*/
		#define HV_STATUS_PAGE_ALREADY_COMMITTED ((u16)0x1022)

		/*
		* HV_STATUS_PAGE_NOT_ALREADY_COMMITTED
		* The specified virtual address was not already backed by physical memory.
		*/
		#define HV_STATUS_PAGE_NOT_ALREADY_COMMITTED ((u16)0x1023)

		/*
		* HV_STATUS_COMMITTED_PAGES_REMAIN
		* Committed pages remain in the section.
		*/
		#define HV_STATUS_COMMITTED_PAGES_REMAIN ((u16)0x1024)

		/*
		* HV_STATUS_NO_REMAINING_COMMITTED_PAGES
		* No additional committed pages beyond the specified page exist in the
		* section.
		*/
		#define HV_STATUS_NO_REMAINING_COMMITTED_PAGES ((u16)0x1025)

		/*
		* HV_STATUS_INSUFFICIENT_COMPARTMENT_VA
		* The VA space of the compartment is exhausted.
		*/
		#define HV_STATUS_INSUFFICIENT_COMPARTMENT_VA ((u16)0x1026)

		/*
		* HV_STATUS_DEREF_SPA_LIST_FULL
		* The SPA dereference list is full, and there are additional entries to be
		* added to it.
		*/
		#define HV_STATUS_DEREF_SPA_LIST_FULL ((u16)0x1027)

		/*
		* HV_STATUS_GPA_OUT_OF_RANGE
		* The supplied GPA is out of range.
		*/
		#define HV_STATUS_GPA_OUT_OF_RANGE ((u16)0x1027)

		/*
		* HV_STATUS_NONVOLATILE_XMM_STALE
		* The XMM register that was being accessed is stale.
		*/
		#define HV_STATUS_NONVOLATILE_XMM_STALE ((u16)0x1028)

		/* HV_STATUS_UNSUPPORTED_PROCESSOR
		* The hypervisor does not support the processors in this system.
		*/
		#define HV_STATUS_UNSUPPORTED_PROCESSOR ((u16)0x1029)

		/*
		* HV_STATUS_INSUFFICIENT_CROM_SPACE
		* Insufficient space existed for copying over the CROM contents.
		*/
		#define HV_STATUS_INSUFFICIENT_CROM_SPACE ((u16)0x2000)

		/*
		* HV_STATUS_BAD_CROM_FORMAT
		* The contents of the CROM failed validation attempts.
		*/
		#define HV_STATUS_BAD_CROM_FORMAT ((u16)0x2001)

		/*
		* HV_STATUS_UNSUPPORTED_CROM_FORMAT
		* The contents of the CROM contain contents the parser doesn't support.
		*/
		#define HV_STATUS_UNSUPPORTED_CROM_FORMAT ((u16)0x2002)

		/*
		* HV_STATUS_UNSUPPORTED_CONTROLLER
		* The register format of the OHCI controller specified for debugging is not
		* supported.
		*/
		#define HV_STATUS_UNSUPPORTED_CONTROLLER ((u16)0x2003)

		/*
		* HV_STATUS_CROM_TOO_LARGE
		* The CROM contents were to large to copy over.
		*/
		#define HV_STATUS_CROM_TOO_LARGE ((u16)0x2004)

		/*
		* HV_STATUS_CONTROLLER_IN_USE
		* The OHCI controller specified for debugging cannot be used as it is already
		* in use.
		*/
		#define HV_STATUS_CONTROLLER_IN_USE ((u16)0x2005)


		/*
		* The below CPUID leaves are present if VersionAndFeatures.HypervisorPresent
		* is set by CPUID(HvCpuIdFunctionVersionAndFeatures).

drivers/staging/hv/include/HvStatus.h

deleted100644 → 0

+0 −510

File deleted.

Preview size limit exceeded, changes collapsed.