Commit 6924dfb0 authored by Michael Hennerich's avatar Michael Hennerich Committed by Mike Frysinger
Browse files

Blackfin: bf527-ezkit: add support for V2.1 boards 



Signed-off-by: default avatarMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent e18e7dd3

arch/blackfin/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -349,7 +349,7 @@ config MEM_MT48LC8M32B2B5_7 


config MEM_MT48LC32M16A2TG_75

	bool

	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)

	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)

	default y



config MEM_MT48LC32M8A2_75
@@ -448,7 +448,7 @@ config VCO_MULT 
	range 1 64

	default "22" if BFIN533_EZKIT

	default "45" if BFIN533_STAMP

	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)

	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)

	default "22" if BFIN533_BLUETECHNIX_CM

	default "20" if (BFIN537_BLUETECHNIX_CM_E || BFIN537_BLUETECHNIX_CM_U || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)

	default "20" if BFIN561_EZKIT

arch/blackfin/configs/BF527-EZKIT-V2_defconfig

0 → 100644
+1811 −0

File added.

Preview size limit exceeded, changes collapsed.

arch/blackfin/mach-bf527/boards/Kconfig

+5 −0
Original line number Diff line number Diff line
@@ -9,6 +9,11 @@ config BFIN527_EZKIT 
	help

	  BF527-EZKIT-LITE board support.



config BFIN527_EZKIT_V2

	bool "BF527-EZKIT-V2"

	help

	  BF527-EZKIT-LITE V2.1+ board support.



config BFIN527_BLUETECHNIX_CM

	bool "Bluetechnix CM-BF527"

	help

arch/blackfin/mach-bf527/boards/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -3,5 +3,6 @@ 
#



obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o

obj-$(CONFIG_BFIN527_EZKIT_V2)         += ezkit.o

obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o

obj-$(CONFIG_BFIN526_EZBRD)            += ezbrd.o

arch/blackfin/mach-bf527/boards/ezkit.c

+132 −21
Original line number Diff line number Diff line
@@ -18,6 +18,8 @@ 
#include <linux/interrupt.h>

#include <linux/usb/sl811.h>

#include <linux/usb/musb.h>

#include <linux/leds.h>

#include <linux/input.h>

#include <asm/dma.h>

#include <asm/bfin5xx_spi.h>

#include <asm/reboot.h>
@@ -29,7 +31,11 @@ 
/*

 * Name the Board for the /proc/cpuinfo

 */

#ifdef CONFIG_BFIN527_EZKIT_V2

const char bfin_board_name[] = "ADI BF527-EZKIT V2";

#else

const char bfin_board_name[] = "ADI BF527-EZKIT";

#endif



/*

 *  Driver needs to know address, irq and flag pin.
@@ -143,6 +149,32 @@ static struct platform_device bf52x_t350mcqb_device = { 
};

#endif



#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)

#include <asm/bfin-lq035q1.h>



static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {

	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,

};



static struct resource bfin_lq035q1_resources[] = {

	{

		.start = IRQ_PPI_ERROR,

		.end = IRQ_PPI_ERROR,

		.flags = IORESOURCE_IRQ,

	},

};



static struct platform_device bfin_lq035q1_device = {

	.name		= "bfin-lq035q1",

	.id		= -1,

	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),

	.resource	= bfin_lq035q1_resources,

	.dev		= {

		.platform_data = &bfin_lq035q1_data,

	},

};

#endif



#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)

static struct mtd_partition ezkit_partitions[] = {

	{
@@ -500,16 +532,15 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = { 
};

#endif



#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \

	 && defined(CONFIG_SND_SOC_WM8731_SPI)

static struct bfin5xx_spi_chip spi_wm8731_chip_info = {

#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)

static struct bfin5xx_spi_chip spidev_chip_info = {

	.enable_dma = 0,

	.bits_per_word = 16,

	.bits_per_word = 8,

};

#endif



#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)

static struct bfin5xx_spi_chip spidev_chip_info = {

#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)

static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {

	.enable_dma	= 0,

	.bits_per_word	= 8,

};
@@ -586,17 +617,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.mode = SPI_CPHA | SPI_CPOL,

	},

#endif

#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \

	 && defined(CONFIG_SND_SOC_WM8731_SPI)

	{

		.modalias	= "wm8731",

		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */

		.bus_num	= 0,

		.chip_select    = 5,

		.controller_data = &spi_wm8731_chip_info,

		.mode = SPI_MODE_0,

	},

#endif

#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)

	{

		.modalias = "spidev",
@@ -606,6 +626,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
		.controller_data = &spidev_chip_info,

	},

#endif

#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)

	{

		.modalias = "bfin-lq035q1-spi",

		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */

		.bus_num = 0,

		.chip_select = 7,

		.controller_data = &lq035q1_spi_chip_info,

		.mode = SPI_CPHA | SPI_CPOL,

	},

#endif

};



#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -824,6 +854,71 @@ static struct platform_device i2c_bfin_twi_device = { 
};

#endif



#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)

#include <linux/mfd/adp5520.h>



	/*

	 *  ADP5520/5501 LEDs Data

	 */



static struct led_info adp5520_leds[] = {

	{

		.name = "adp5520-led1",

		.default_trigger = "none",

		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,

	},

};



static struct adp5520_leds_platform_data adp5520_leds_data = {

	.num_leds = ARRAY_SIZE(adp5520_leds),

	.leds = adp5520_leds,

	.fade_in = ADP5520_FADE_T_600ms,

	.fade_out = ADP5520_FADE_T_600ms,

	.led_on_time = ADP5520_LED_ONT_600ms,

};



	/*

	 *  ADP5520 Keypad Data

	 */



static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {

	[ADP5520_KEY(3, 3)]	= KEY_1,

	[ADP5520_KEY(2, 3)]	= KEY_2,

	[ADP5520_KEY(1, 3)]	= KEY_3,

	[ADP5520_KEY(0, 3)]	= KEY_UP,

	[ADP5520_KEY(3, 2)]	= KEY_4,

	[ADP5520_KEY(2, 2)]	= KEY_5,

	[ADP5520_KEY(1, 2)]	= KEY_6,

	[ADP5520_KEY(0, 2)]	= KEY_DOWN,

	[ADP5520_KEY(3, 1)]	= KEY_7,

	[ADP5520_KEY(2, 1)]	= KEY_8,

	[ADP5520_KEY(1, 1)]	= KEY_9,

	[ADP5520_KEY(0, 1)]	= KEY_DOT,

	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,

	[ADP5520_KEY(2, 0)]	= KEY_0,

	[ADP5520_KEY(1, 0)]	= KEY_HELP,

	[ADP5520_KEY(0, 0)]	= KEY_ENTER,

};



static struct adp5520_keys_platform_data adp5520_keys_data = {

	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,

	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,

	.keymap		= adp5520_keymap,

	.keymapsize	= ARRAY_SIZE(adp5520_keymap),

	.repeat		= 0,

};



	/*

	 *  ADP5520/5501 Multifuction Device Init Data

	 */



static struct adp5520_platform_data adp5520_pdev_data = {

	.leds = &adp5520_leds_data,

	.keys = &adp5520_keys_data,

};



#endif



static struct i2c_board_info __initdata bfin_i2c_board_info[] = {

#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)

	{
@@ -841,6 +936,20 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { 
		I2C_BOARD_INFO("bfin-adv7393", 0x2B),

	},

#endif

#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)

	{

		I2C_BOARD_INFO("ad7879", 0x2C),

		.irq = IRQ_PF8,

		.platform_data = (void *)&bfin_ad7879_ts_info,

	},

#endif

#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)

	{

		I2C_BOARD_INFO("pmic-adp5520", 0x32),

		.irq = IRQ_PF9,

		.platform_data = (void *)&adp5520_pdev_data,

	},

#endif

};



#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -915,7 +1024,6 @@ static struct platform_device bfin_sport1_uart_device = { 
#endif



#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)

#include <linux/input.h>

#include <linux/gpio_keys.h>



static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -937,7 +1045,6 @@ static struct platform_device bfin_device_gpiokeys = { 
#endif



#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)

#include <linux/input.h>

#include <asm/bfin_rotary.h>



static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -1043,6 +1150,10 @@ static struct platform_device *stamp_devices[] __initdata = { 
	&bf52x_t350mcqb_device,

#endif



#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)

	&bfin_lq035q1_device,

#endif



#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)

#ifdef CONFIG_SERIAL_BFIN_UART0

	&bfin_uart0_device,