fbdev: remove w100fb driver

	help

	  Framebuffer driver for the Freescale SoC DIU

config FB_W100

	tristate "W100 frame buffer support"

	depends on FB && HAS_IOMEM && (ARCH_PXA || COMPILE_TEST)

	select FB_CFB_FILLRECT

	select FB_CFB_COPYAREA

	select FB_CFB_IMAGEBLIT

	help

	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.

	  It can also drive the w3220 chip found on iPAQ hx4700.

	  This driver is also available as a module ( = code which can be

	  inserted and removed from the running kernel whenever you want). The

	  module will be called w100fb. If you want to compile it as a module,

	  say M here and read <file:Documentation/kbuild/modules.rst>.

	  If unsure, say N.

config FB_SH_MOBILE_LCDC

	tristate "SuperH Mobile LCDC framebuffer support"

	depends on FB && HAVE_CLK && HAS_IOMEM

obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o

obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o

obj-$(CONFIG_MMP_DISP)           += mmp/

obj-$(CONFIG_FB_W100)		  += w100fb.o

obj-$(CONFIG_FB_AU1100)		  += au1100fb.o

obj-$(CONFIG_FB_AU1200)		  += au1200fb.o

obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o

/* SPDX-License-Identifier: GPL-2.0-only */

/*

 *  Support for the w100 frame buffer.

 *

 *  Copyright (c) 2004-2005 Richard Purdie

 *  Copyright (c) 2005 Ian Molton

 */

#define W100_GPIO_PORT_A	0

#define W100_GPIO_PORT_B	1

#define CLK_SRC_XTAL  0

#define CLK_SRC_PLL   1

struct w100fb_par;

unsigned long w100fb_gpio_read(int port);

void w100fb_gpio_write(int port, unsigned long value);

unsigned long w100fb_get_hsynclen(struct device *dev);

/* LCD Specific Routines and Config */

struct w100_tg_info {

	void (*change)(struct w100fb_par*);

	void (*suspend)(struct w100fb_par*);

	void (*resume)(struct w100fb_par*);

};

/* General Platform Specific w100 Register Values */

struct w100_gen_regs {

	unsigned long lcd_format;

	unsigned long lcdd_cntl1;

	unsigned long lcdd_cntl2;

	unsigned long genlcd_cntl1;

	unsigned long genlcd_cntl2;

	unsigned long genlcd_cntl3;

};

struct w100_gpio_regs {

	unsigned long init_data1;

	unsigned long init_data2;

	unsigned long gpio_dir1;

	unsigned long gpio_oe1;

	unsigned long gpio_dir2;

	unsigned long gpio_oe2;

};

/* Optional External Memory Configuration */

struct w100_mem_info {

	unsigned long ext_cntl;

	unsigned long sdram_mode_reg;

	unsigned long ext_timing_cntl;

	unsigned long io_cntl;

	unsigned int size;

};

struct w100_bm_mem_info {

	unsigned long ext_mem_bw;

	unsigned long offset;

	unsigned long ext_timing_ctl;

	unsigned long ext_cntl;

	unsigned long mode_reg;

	unsigned long io_cntl;

	unsigned long config;

};

/* LCD Mode definition */

struct w100_mode {

	unsigned int xres;

	unsigned int yres;

	unsigned short left_margin;

	unsigned short right_margin;

	unsigned short upper_margin;

	unsigned short lower_margin;

	unsigned long crtc_ss;

	unsigned long crtc_ls;

	unsigned long crtc_gs;

	unsigned long crtc_vpos_gs;

	unsigned long crtc_rev;

	unsigned long crtc_dclk;

	unsigned long crtc_gclk;

	unsigned long crtc_goe;

	unsigned long crtc_ps1_active;

	char pll_freq;

	char fast_pll_freq;

	int sysclk_src;

	int sysclk_divider;

	int pixclk_src;

	int pixclk_divider;

	int pixclk_divider_rotated;

};

struct w100_pll_info {

	uint16_t freq;  /* desired Fout for PLL (Mhz) */

	uint8_t M;      /* input divider */

	uint8_t N_int;  /* VCO multiplier */

	uint8_t N_fac;  /* VCO multiplier fractional part */

	uint8_t tfgoal;

	uint8_t lock_time;

};

/* Initial Video mode orientation flags */

#define INIT_MODE_ROTATED  0x1

#define INIT_MODE_FLIPPED  0x2

/*

 * This structure describes the machine which we are running on.

 * It is set by machine specific code and used in the probe routine

 * of drivers/video/w100fb.c

 */

struct w100fb_mach_info {

	/* General Platform Specific Registers */

	struct w100_gen_regs *regs;

	/* Table of modes the LCD is capable of */

	struct w100_mode *modelist;

	unsigned int num_modes;

	/* Hooks for any platform specific tg/lcd code (optional) */

	struct w100_tg_info *tg;

	/* External memory definition (if present) */

	struct w100_mem_info *mem;

	/* Additional External memory definition (if present) */

	struct w100_bm_mem_info *bm_mem;

	/* GPIO definitions (optional) */

	struct w100_gpio_regs *gpio;

	/* Initial Mode flags */

	unsigned int init_mode;

	/* Xtal Frequency */

	unsigned int xtal_freq;

	/* Enable Xtal input doubler (1 == enable) */

	unsigned int xtal_dbl;

};

/* General frame buffer data structure */

struct w100fb_par {

	unsigned int chip_id;

	unsigned int xres;

	unsigned int yres;

	unsigned int extmem_active;

	unsigned int flip;

	unsigned int blanked;

	unsigned int fastpll_mode;

	unsigned long hsync_len;

	struct w100_mode *mode;

	struct w100_pll_info *pll_table;

	struct w100fb_mach_info *mach;

	uint32_t *saved_intmem;

	uint32_t *saved_extmem;

};