Commit 84b0b6bc authored by Bjorn Andersson's avatar Bjorn Andersson Committed by Andy Gross
Browse files

ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts 



This introduces initial support for the Sony Xperia Z smartphone, including
support for UART, MMC, USB gadget and physical buttons.

Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: default avatarAndy Gross <agross@codeaurora.org>
parent 1099b26e

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -502,6 +502,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \ 
dtb-$(CONFIG_ARCH_QCOM) += \

	qcom-apq8064-cm-qs600.dtb \

	qcom-apq8064-ifc6410.dtb \

	qcom-apq8064-sony-xperia-yuga.dtb \

	qcom-apq8074-dragonboard.dtb \

	qcom-apq8084-ifc6540.dtb \

	qcom-apq8084-mtp.dtb \

arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts

0 → 100644
+436 −0
Original line number Diff line number Diff line 
#include "qcom-apq8064-v2.0.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/mfd/qcom-rpm.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>



/ {

	model = "Sony Xperia Z";

	compatible = "sony,xperia-yuga", "qcom,apq8064";



	aliases {

		serial0 = &gsbi5_serial;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	gpio-keys {

		compatible = "gpio-keys";

		input-name = "gpio-keys";



		pinctrl-names = "default";

		pinctrl-0 = <&gpio_keys_pin_a>;



		camera-focus {

			label = "camera_focus";

			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_CAMERA_FOCUS>;

		};



		camera-snapshot {

			label = "camera_snapshot";

			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_CAMERA>;

		};



		volume-down {

			label = "volume_down";

			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEDOWN>;

		};



		volume-up {

			label = "volume_up";

			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

		};

	};



	soc {

		pinctrl@800000 {

			gsbi5_uart_pin_a: gsbi5-uart-pin-active {

				rx {

					pins = "gpio52";

					function = "gsbi5";

					drive-strength = <2>;

					bias-pull-up;

				};



				tx {

					pins = "gpio51";

					function = "gsbi5";

					drive-strength = <4>;

					bias-disable;

				};

			};



			sdcc1_pin_a: sdcc1-pin-active {

				clk {

					pins = "sdc1_clk";

					drive-strengh = <16>;

					bias-disable;

				};



				cmd {

					pins = "sdc1_cmd";

					drive-strengh = <10>;

					bias-pull-up;

				};



				data {

					pins = "sdc1_data";

					drive-strengh = <10>;

					bias-pull-up;

				};

			};



			sdcc3_pin_a: sdcc3-pin-active {

				clk {

					pins = "sdc3_clk";

					drive-strengh = <8>;

					bias-disable;

				};



				cmd {

					pins = "sdc3_cmd";

					drive-strengh = <8>;

					bias-pull-up;

				};



				data {

					pins = "sdc3_data";

					drive-strengh = <8>;

					bias-pull-up;

				};

			};



			sdcc3_cd_pin_a: sdcc3-cd-pin-active {

				pins = "gpio26";

				function = "gpio";



				drive-strength = <2>;

				bias-disable;

			};

		};





		rpm@108000 {

			regulators {

				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;

				vin_lvs_1_3_6-supply = <&pm8921_s4>;

				vin_lvs_4_5_7-supply = <&pm8921_s4>;

				vin_ncp-supply = <&pm8921_l6>;

				vin_lvs2-supply = <&pm8921_s4>;

				vin_l24-supply = <&pm8921_s1>;

				vin_l25-supply = <&pm8921_s1>;

				vin_l27-supply = <&pm8921_s7>;

				vin_l28-supply = <&pm8921_s7>;



				/* Buck SMPS */

				s1 {

					regulator-always-on;

					regulator-min-microvolt = <1225000>;

					regulator-max-microvolt = <1225000>;

					qcom,switch-mode-frequency = <3200000>;

					bias-pull-down;

				};



				s2 {

					regulator-min-microvolt = <1300000>;

					regulator-max-microvolt = <1300000>;

					qcom,switch-mode-frequency = <1600000>;

					bias-pull-down;

				};



				s3 {

					regulator-min-microvolt = <500000>;

					regulator-max-microvolt = <1150000>;

					qcom,switch-mode-frequency = <4800000>;

					bias-pull-down;

				};



				s4 {

					regulator-always-on;

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,switch-mode-frequency = <1600000>;

					bias-pull-down;

					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;

				};



				s7 {

					regulator-min-microvolt = <1300000>;

					regulator-max-microvolt = <1300000>;

					qcom,switch-mode-frequency = <3200000>;

				};



				s8 {

					regulator-min-microvolt = <2200000>;

					regulator-max-microvolt = <2200000>;

					qcom,switch-mode-frequency = <1600000>;

				};



				/* PMOS LDO */

				l1 {

					regulator-always-on;

					regulator-min-microvolt = <1100000>;

					regulator-max-microvolt = <1100000>;

					bias-pull-down;

				};



				l2 {

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					bias-pull-down;

				};



				l3 {

					regulator-min-microvolt = <3075000>;

					regulator-max-microvolt = <3075000>;

					bias-pull-down;

				};



				l4 {

					regulator-always-on;

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					bias-pull-down;

				};



				l5 {

					regulator-min-microvolt = <2950000>;

					regulator-max-microvolt = <2950000>;

					bias-pull-down;

				};



				l6 {

					regulator-min-microvolt = <2950000>;

					regulator-max-microvolt = <2950000>;

					bias-pull-down;

				};



				l7 {

					regulator-min-microvolt = <1850000>;

					regulator-max-microvolt = <2950000>;

					bias-pull-down;

				};



				l8 {

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					bias-pull-down;

				};



				l9 {

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

					bias-pull-down;

				};



				l10 {

					regulator-min-microvolt = <2900000>;

					regulator-max-microvolt = <2900000>;

					bias-pull-down;

				};



				l11 {

					regulator-min-microvolt = <3000000>;

					regulator-max-microvolt = <3000000>;

					bias-pull-down;

				};



				l12 {

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					bias-pull-down;

				};



				l14 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					bias-pull-down;

				};



				l15 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <2950000>;

					bias-pull-down;

				};



				l16 {

					regulator-min-microvolt = <2800000>;

					regulator-max-microvolt = <2800000>;

					bias-pull-down;

				};



				l17 {

					regulator-min-microvolt = <2000000>;

					regulator-max-microvolt = <2000000>;

					bias-pull-down;

				};



				l18 {

					regulator-min-microvolt = <1200000>;

					regulator-max-microvolt = <1200000>;

					bias-pull-down;

				};



				l21 {

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

					bias-pull-down;

				};



				l22 {

					regulator-min-microvolt = <2600000>;

					regulator-max-microvolt = <2600000>;

					bias-pull-down;

				};



				l23 {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					bias-pull-down;

				};



				l24 {

					regulator-min-microvolt = <750000>;

					regulator-max-microvolt = <1150000>;

					bias-pull-down;

				};



				l25 {

					regulator-always-on;

					regulator-min-microvolt = <1250000>;

					regulator-max-microvolt = <1250000>;

					bias-pull-down;

				};



				l27 {

					regulator-min-microvolt = <1100000>;

					regulator-max-microvolt = <1100000>;

				};



				l28 {

					regulator-min-microvolt = <1050000>;

					regulator-max-microvolt = <1050000>;

					bias-pull-down;

				};



				l29 {

					regulator-min-microvolt = <2000000>;

					regulator-max-microvolt = <2000000>;

					bias-pull-down;

				};



				/* Low Voltage Switch */

				lvs1 {

					bias-pull-down;

				};



				lvs2 {

					bias-pull-down;

				};



				lvs3 {

					bias-pull-down;

				};



				lvs4 {

					bias-pull-down;

				};



				lvs5 {

					bias-pull-down;

				};



				lvs6 {

					bias-pull-down;

				};



				lvs7 {

					bias-pull-down;

				};



				usb-switch {};



				hdmi-switch {};



				ncp {

					regulator-min-microvolt = <1800000>;

					regulator-max-microvolt = <1800000>;

					qcom,switch-mode-frequency = <1600000>;

				};

			};

		};



		qcom,ssbi@500000 {

			pmic@0 {

				gpio@150 {

					gpio_keys_pin_a: gpio-keys-pin-active {

						pins = "gpio3", "gpio4", "gpio29", "gpio35";

						function = "normal";



						bias-pull-up;

						drive-push-pull;

						input-enable;

						power-source = <2>;

						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;

						qcom,pull-up-strength = <0>;

					};

				};

			};

		};



		phy@12500000 {

			status		= "okay";

			vddcx-supply	= <&pm8921_s3>;

			v3p3-supply	= <&pm8921_l3>;

			v1p8-supply	= <&pm8921_l4>;

		};



		gadget@12500000 {

			status = "okay";

		};



		gsbi@1a200000 {

			status = "ok";

			qcom,mode = <GSBI_PROT_I2C_UART>;



			serial@1a240000 {

				status = "ok";



				pinctrl-names = "default";

				pinctrl-0 = <&gsbi5_uart_pin_a>;

			};

		};



		amba {

			sdcc1: sdcc@12400000 {

				status = "okay";



				vmmc-supply = <&pm8921_l5>;

				vqmmc-supply = <&pm8921_s4>;



				pinctrl-names = "default";

				pinctrl-0 = <&sdcc1_pin_a>;

			};



			sdcc3: sdcc@12180000 {

				status = "okay";



				vmmc-supply = <&pm8921_l6>;

				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;



				pinctrl-names = "default";

				pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;

			};

		};

	};

};