Commit a1fb6936 authored by Tim Harvey's avatar Tim Harvey Committed by Shawn Guo
Browse files

ARM: dts: imx: Add GW5910 board support 



The Gateworks GW5910 is an IMX6 SoC based single board computer with:
 - IMX6Q or IMX6DL
 - 32bit DDR3 DRAM
 - FEC GbE RJ45 front-panel
 - 1x miniPCIe socket with PCI Gen2, USB2
 - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
 - 5V to 60V DC input barrel jack
 - 3axis accelerometer (lis2de12)
 - GPS (ublox ZOE-M8Q)
 - bi-color front-panel LED
 - 256MB NAND boot device
 - microSD socket (with UHS-I support)
 - user pushbutton
 - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
 - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6)
 - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6)
 - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
 - off-board SPI connector (1x chip-select)

Signed-off-by: default avatarTim Harvey <tharvey@gateworks.com>
Signed-off-by: default avatarRobert Jones <rjones@gateworks.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 12512029

arch/arm/boot/dts/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -423,6 +423,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6dl-gw5903.dtb \

	imx6dl-gw5904.dtb \

	imx6dl-gw5907.dtb \

	imx6dl-gw5910.dtb \

	imx6dl-hummingboard.dtb \

	imx6dl-hummingboard-emmc-som-v15.dtb \

	imx6dl-hummingboard-som-v15.dtb \
@@ -495,6 +496,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6q-gw5903.dtb \

	imx6q-gw5904.dtb \

	imx6q-gw5907.dtb \

	imx6q-gw5910.dtb \

	imx6q-h100.dtb \

	imx6q-hummingboard.dtb \

	imx6q-hummingboard-emmc-som-v15.dtb \

arch/arm/boot/dts/imx6dl-gw5910.dts

0 → 100644
+14 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Copyright 2019 Gateworks Corporation

 */



/dts-v1/;



#include "imx6dl.dtsi"

#include "imx6qdl-gw5910.dtsi"



/ {

	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";

	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";

};

arch/arm/boot/dts/imx6q-gw5910.dts

0 → 100644
+14 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Copyright 2019 Gateworks Corporation

 */



/dts-v1/;



#include "imx6q.dtsi"

#include "imx6qdl-gw5910.dtsi"



/ {

	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";

	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";

};

arch/arm/boot/dts/imx6qdl-gw5910.dtsi

0 → 100644
+491 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

/*

 * Copyright 2019 Gateworks Corporation

 */



#include <dt-bindings/gpio/gpio.h>



/ {

	/* these are used by bootloader for disabling nodes */

	aliases {

		led0 = &led0;

		led1 = &led1;

		led2 = &led2;

	};



	chosen {

		stdout-path = &uart2;

	};



	memory@10000000 {

		device_type = "memory";

		reg = <0x10000000 0x20000000>;

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpio_leds>;



		led0: user1 {

			label = "user1";

			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */

			default-state = "on";

			linux,default-trigger = "heartbeat";

		};



		led1: user2 {

			label = "user2";

			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */

			default-state = "off";

		};



		led2: user3 {

			label = "user3";

			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */

			default-state = "off";

		};

	};



	pps {

		compatible = "pps-gpio";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_pps>;

		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;

		status = "okay";

	};



	reg_3p3v: regulator-3p3v {

		compatible = "regulator-fixed";

		regulator-name = "3P3V";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

	};



	reg_5p0v: regulator-5p0v {

		compatible = "regulator-fixed";

		regulator-name = "5P0V";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

	};



	reg_wl: regulator-wl {

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_reg_wl>;

		compatible = "regulator-fixed";

		regulator-name = "wl";

		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;

		startup-delay-us = <100>;

		enable-active-high;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

	};



	reg_bt: regulator-bt {

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_reg_bt>;

		compatible = "regulator-fixed";

		regulator-name = "bt";

		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;

		startup-delay-us = <100>;

		enable-active-high;

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

	};

};





&ecspi3 {

	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi3>;

	status = "okay";

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii-id";

	status = "okay";

};



&gpmi {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_gpmi_nand>;

	status = "okay";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c1>;

	status = "okay";



	gpio@23 {

		compatible = "nxp,pca9555";

		reg = <0x23>;

		gpio-controller;

		#gpio-cells = <2>;

	};



	eeprom@50 {

		compatible = "atmel,24c02";

		reg = <0x50>;

		pagesize = <16>;

	};



	eeprom@51 {

		compatible = "atmel,24c02";

		reg = <0x51>;

		pagesize = <16>;

	};



	eeprom@52 {

		compatible = "atmel,24c02";

		reg = <0x52>;

		pagesize = <16>;

	};



	eeprom@53 {

		compatible = "atmel,24c02";

		reg = <0x53>;

		pagesize = <16>;

	};



	rtc@68 {

		compatible = "dallas,ds1672";

		reg = <0x68>;

	};

};



&i2c2 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c2>;

	status = "okay";

};



&i2c3 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c3>;

	status = "okay";



	accel@19 {

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_accel>;

		compatible = "st,lis2de12";

		reg = <0x19>;

		st,drdy-int-pin = <1>;

		interrupt-parent = <&gpio7>;

		interrupts = <13 0>;

		interrupt-names = "INT1";

	};

};



&pcie {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pcie>;

	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;

	status = "okay";

};



&pwm2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */

	status = "disabled";

};



&pwm3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */

	status = "disabled";

};



/* off-board RS232 */

&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;

	status = "okay";

};



/* serial console */

&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart2>;

	status = "okay";

};



/* Sterling-LWB Bluetooth */

&uart4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart4>;

	uart-has-rtscts;

	status = "okay";

};



/* GPS */

&uart5 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart5>;

	status = "okay";

};



&usbotg {

	vbus-supply = <&reg_5p0v>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usbotg>;

	disable-over-current;

	status = "okay";

};



&usbh1 {

	status = "okay";

};



/* Sterling-LWB SDIO WiFi */

&usdhc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc2>;

	vmmc-supply = <&reg_3p3v>;

	non-removable;

	bus-width = <4>;

	status = "okay";

};



&usdhc3 {

	pinctrl-names = "default", "state_100mhz", "state_200mhz";

	pinctrl-0 = <&pinctrl_usdhc3>;

	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;

	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;

	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;

	vmmc-supply = <&reg_3p3v>;

	status = "okay";

};



&wdog1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_wdog>;

	fsl,ext-reset-output;

};



&iomuxc {

	pinctrl_accel: accelmuxgrp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1

		>;

	};



	pinctrl_ecspi3: escpi3grp {

		fsl,pins = <

			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1

			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1

			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1

			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1

		>;

	};



	pinctrl_enet: enetgrp {

		fsl,pins = <

			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030

			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030

			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030

			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030

			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030

			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030

			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030

			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030

			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030

			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030

			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030

			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030

			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0

			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0

			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8

			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0

		>;

	};



	pinctrl_gpio_leds: gpioledsgrp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0

			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0

			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0

		>;

	};



	pinctrl_gpmi_nand: gpminandgrp {

		fsl,pins = <

			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1

			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1

			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1

			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000

			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1

			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1

			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1

			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1

			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1

			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1

			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1

			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1

			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1

			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1

			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1

		>;

	};



	pinctrl_i2c1: i2c1grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1

			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1

			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0

		>;

	};



	pinctrl_i2c2: i2c2grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1

			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1

		>;

	};



	pinctrl_i2c3: i2c3grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1

			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1

		>;

	};



	pinctrl_pcie: pciegrp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0

		>;

	};



	pinctrl_pps: ppsgrp {

		fsl,pins = <

			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1

		>;

	};



	pinctrl_pwm2: pwm2grp {

		fsl,pins = <

			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1

		>;

	};



	pinctrl_pwm3: pwm3grp {

		fsl,pins = <

			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1

		>;

	};



	pinctrl_reg_bt: regbtgrp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1

		>;

	};



	pinctrl_reg_wl: regwlgrp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1

		>;

	};



	pinctrl_uart1: uart1grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1

		>;

	};



	pinctrl_uart2: uart2grp {

		fsl,pins = <

			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1

			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1

		>;

	};



	pinctrl_uart4: uart4grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1

			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1

		>;

	};



	pinctrl_uart5: uart5grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1

			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1

		>;

	};



	pinctrl_usbotg: usbotggrp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059

		>;

	};



	pinctrl_usdhc2: usdhc2grp {

		fsl,pins = <

			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059

			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059

			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059

			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059

			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059

			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059

		>;

	};



	pinctrl_usdhc3: usdhc3grp {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059

			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059

			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059

			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059

			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059

			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059

			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */

			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059

		>;

	};



	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9

			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9

			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9

			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9

			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9

			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9

			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */

			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9

		>;

	};



	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9

			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9

			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9

			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9

			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9

			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9

			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */

			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9

		>;

	};



	pinctrl_wdog: wdoggrp {

		fsl,pins = <

			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0

		>;

	};

};