Commit a5fde059 authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: msm8998-xperia: Add camera regulators 



All of the machines of the Sony Yoshino platform are equipped with
two cameras, sharing the same regulators configuration.

Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: default avatarMarijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123733.367248-6-angelogioacchino.delregno@somainline.org
parent 67372ee2

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi

+56 −0
Original line number Diff line number Diff line
@@ -30,6 +30,38 @@ board_vbat: vbat-regulator { 
		regulator-boot-on;

	};



	cam0_vdig_vreg: cam0-vdig {

		compatible = "regulator-fixed";

		regulator-name = "cam0_vdig";

		startup-delay-us = <0>;

		enable-active-high;

		gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam0_vdig_default>;

	};



	cam1_vdig_vreg: cam1-vdig {

		compatible = "regulator-fixed";

		regulator-name = "cam1_vdig";

		startup-delay-us = <0>;

		enable-active-high;

		gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam1_vdig_default>;

		vin-supply = <&vreg_s3a_1p35>;

	};



	cam_vio_vreg: cam-vio-vreg {

		compatible = "regulator-fixed";

		regulator-name = "cam_vio_vreg";

		startup-delay-us = <0>;

		enable-active-high;

		gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&cam_vio_default>;

		vin-supply = <&vreg_lvs1a_1p8>;

	};



	touch_vddio_vreg: touch-vddio-vreg {

		compatible = "regulator-fixed";

		regulator-name = "touch_vddio_vreg";
@@ -278,6 +310,16 @@ cam_snapshot_pin_a: cam-snapshot-btn-active { 
};



&pmi8998_gpio {

	cam_vio_default: cam-vio-active {

		pins = "gpio1";

		function = PMIC_GPIO_FUNC_NORMAL;

		bias-disable;

		drive-push-pull;

		output-low;

		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;

		power-source = <1>;

	};



	vib_default: vib-en {

		pins = "gpio5";

		function = PMIC_GPIO_FUNC_NORMAL;
@@ -540,6 +582,20 @@ cci1_default: cci1-default { 
		drive-strength = <2>;

	};



	cam0_vdig_default: cam0-vdig-default {

		pins = "gpio21";

		function = "gpio";

		bias-disable;

		drive-strength = <2>;

	};



	cam1_vdig_default: cam1-vdig-default {

		pins = "gpio25";

		function = "gpio";

		bias-disable;

		drive-strength = <2>;

	};



	hall_sensor0_default: acc-cover-open {

		pins = "gpio124";

		function = "gpio";