Commit ada71f55 authored by Micky Ching's avatar Micky Ching Committed by Lee Jones
Browse files

mfd: rtsx: Place register address and values togather 



It is more readable to place register address and values define
togather. The values define add two leading space indicate belong
to the register address defined above.

Signed-off-by: default avatarMicky Ching <micky_ching@realsil.com.cn>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 84f00b1b

include/linux/mfd/rtsx_pci.h

+369 −467
Original line number Diff line number Diff line
@@ -28,25 +28,27 @@ 


#define MAX_RW_REG_CNT			1024



/* PCI Operation Register Address */

#define RTSX_HCBAR			0x00

#define RTSX_HCBCTLR			0x04

#define RTSX_HDBAR			0x08

#define RTSX_HDBCTLR			0x0C

#define RTSX_HAIMR			0x10

#define RTSX_BIPR			0x14

#define RTSX_BIER			0x18



/* Host command buffer control register */

#define   STOP_CMD			(0x01 << 28)

#define   READ_REG_CMD			0

#define   WRITE_REG_CMD			1

#define   CHECK_REG_CMD			2



/* Host data buffer control register */

#define RTSX_HDBAR			0x08

#define   SG_INT			0x04

#define   SG_END			0x02

#define   SG_VALID			0x01

#define   SG_NO_OP			0x00

#define   SG_TRANS_DATA			(0x02 << 4)

#define   SG_LINK_DESC			(0x03 << 4)

#define RTSX_HDBCTLR			0x0C

#define   SDMA_MODE			0x00

#define   ADMA_MODE			(0x02 << 26)

#define   STOP_DMA			(0x01 << 28)

#define   TRIG_DMA			(0x01 << 31)



/* Host access internal memory register */

#define RTSX_HAIMR			0x10

#define   HAIMR_TRANS_START		(0x01 << 31)

#define   HAIMR_READ			0x00

#define   HAIMR_WRITE			(0x01 << 30)
@@ -54,7 +56,7 @@ 
#define   HAIMR_WRITE_START		(HAIMR_TRANS_START | HAIMR_WRITE)

#define   HAIMR_TRANS_END			(HAIMR_TRANS_START)



/* Bus interrupt pending register */

#define RTSX_BIPR			0x14

#define   CMD_DONE_INT			(1 << 31)

#define   DATA_DONE_INT			(1 << 30)

#define   TRANS_OK_INT			(1 << 29)
@@ -76,10 +78,9 @@ 
#define NEED_COMPLETE_INT	(DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT)

#define RTSX_INT		(CMD_DONE_INT | NEED_COMPLETE_INT | \

					CARD_INT | GPIO0_INT | OC_INT)



#define CARD_EXIST		(XD_EXIST | MS_EXIST | SD_EXIST)



/* Bus interrupt enable register */

#define RTSX_BIER			0x18

#define   CMD_DONE_INT_EN		(1 << 31)

#define   DATA_DONE_INT_EN		(1 << 30)

#define   TRANS_OK_INT_EN		(1 << 29)
@@ -93,9 +94,6 @@ 
#define   MS_OC_INT_EN			(1 << 23)

#define   SD_OC_INT_EN			(1 << 22)



#define READ_REG_CMD		0

#define WRITE_REG_CMD		1

#define CHECK_REG_CMD		2



/*

 * macros for easy use
@@ -140,126 +138,107 @@ 
#define HOST_SG_TBL_BUF_LEN		(RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN)

#define HOST_SG_TBL_ITEMS		(HOST_SG_TBL_BUF_LEN / 8)

#define MAX_SG_ITEM_LEN			0x80000



#define HOST_TO_DEVICE			0

#define DEVICE_TO_HOST			1



#define RTSX_PHASE_MAX		32

#define RX_TUNING_CNT		3



/* SG descriptor */

#define SG_INT			0x04

#define SG_END			0x02

#define SG_VALID		0x01



#define SG_NO_OP		0x00

#define SG_TRANS_DATA		(0x02 << 4)

#define SG_LINK_DESC		(0x03 << 4)



/* Output voltage */

#define OUTPUT_3V3			0

#define OUTPUT_1V8			1



/* Card Clock Enable Register */

#define SD_CLK_EN			0x04

#define MS_CLK_EN			0x08



/* Card Select Register */

#define SD_MOD_SEL			2

#define MS_MOD_SEL			3



/* Card Output Enable Register */

#define SD_OUTPUT_EN			0x04

#define MS_OUTPUT_EN			0x08



/* CARD_SHARE_MODE */

#define CARD_SHARE_MASK			0x0F

#define CARD_SHARE_MULTI_LUN		0x00

#define CARD_SHARE_NORMAL		0x00

#define CARD_SHARE_48_SD		0x04

#define CARD_SHARE_48_MS		0x08

/* CARD_SHARE_MODE for barossa */

#define CARD_SHARE_BAROSSA_SD		0x01

#define CARD_SHARE_BAROSSA_MS		0x02



/* CARD_DRIVE_SEL */

#define MS_DRIVE_8mA			(0x01 << 6)

#define MMC_DRIVE_8mA			(0x01 << 4)

#define XD_DRIVE_8mA			(0x01 << 2)

#define GPIO_DRIVE_8mA			0x01

#define RTS5209_CARD_DRIVE_DEFAULT	(MS_DRIVE_8mA | MMC_DRIVE_8mA |\

						XD_DRIVE_8mA | GPIO_DRIVE_8mA)

#define RTL8411_CARD_DRIVE_DEFAULT	(MS_DRIVE_8mA | MMC_DRIVE_8mA |\

						XD_DRIVE_8mA)

#define RTSX_CARD_DRIVE_DEFAULT		(MS_DRIVE_8mA | GPIO_DRIVE_8mA)



/* SD30_DRIVE_SEL */

#define DRIVER_TYPE_A			0x05

#define DRIVER_TYPE_B			0x03

#define DRIVER_TYPE_C			0x02

#define DRIVER_TYPE_D			0x01

#define CFG_DRIVER_TYPE_A		0x02

#define CFG_DRIVER_TYPE_B		0x03

#define CFG_DRIVER_TYPE_C		0x01

#define CFG_DRIVER_TYPE_D		0x00



/* FPDCTL */

#define SSC_POWER_DOWN			0x01

#define SD_OC_POWER_DOWN		0x02

#define ALL_POWER_DOWN			0x07

#define OC_POWER_DOWN			0x06



/* CLK_CTL */

#define CHANGE_CLK			0x01

#define RTSX_PHASE_MAX			32

#define RX_TUNING_CNT			3



/* LDO_CTL */

#define BPP_ASIC_1V7			0x00

#define BPP_ASIC_1V8			0x01

#define BPP_ASIC_1V9			0x02

#define BPP_ASIC_2V0			0x03

#define BPP_ASIC_2V7			0x04

#define BPP_ASIC_2V8			0x05

#define BPP_ASIC_3V2			0x06

#define BPP_ASIC_3V3			0x07

#define BPP_REG_TUNED18			0x07

#define BPP_TUNED18_SHIFT_8402		5

#define BPP_TUNED18_SHIFT_8411		4

#define BPP_PAD_MASK			0x04

#define BPP_PAD_3V3			0x04

#define BPP_PAD_1V8			0x00

#define BPP_LDO_POWB			0x03

#define BPP_LDO_ON			0x00

#define BPP_LDO_SUSPEND			0x02

#define BPP_LDO_OFF			0x03

#define MS_CFG				0xFD40

#define   SAMPLE_TIME_RISING		0x00

#define   SAMPLE_TIME_FALLING		0x80

#define   PUSH_TIME_DEFAULT		0x00

#define   PUSH_TIME_ODD			0x40

#define   NO_EXTEND_TOGGLE		0x00

#define   EXTEND_TOGGLE_CHK		0x20

#define   MS_BUS_WIDTH_1		0x00

#define   MS_BUS_WIDTH_4		0x10

#define   MS_BUS_WIDTH_8		0x18

#define   MS_2K_SECTOR_MODE		0x04

#define   MS_512_SECTOR_MODE		0x00

#define   MS_TOGGLE_TIMEOUT_EN		0x00

#define   MS_TOGGLE_TIMEOUT_DISEN	0x01

#define MS_NO_CHECK_INT			0x02

#define MS_TPC				0xFD41

#define MS_TRANS_CFG			0xFD42

#define   WAIT_INT			0x80

#define   NO_WAIT_INT			0x00

#define   NO_AUTO_READ_INT_REG		0x00

#define   AUTO_READ_INT_REG		0x40

#define   MS_CRC16_ERR			0x20

#define   MS_RDY_TIMEOUT		0x10

#define   MS_INT_CMDNK			0x08

#define   MS_INT_BREQ			0x04

#define   MS_INT_ERR			0x02

#define   MS_INT_CED			0x01

#define MS_TRANSFER			0xFD43

#define   MS_TRANSFER_START		0x80

#define   MS_TRANSFER_END		0x40

#define   MS_TRANSFER_ERR		0x20

#define   MS_BS_STATE			0x10

#define   MS_TM_READ_BYTES		0x00

#define   MS_TM_NORMAL_READ		0x01

#define   MS_TM_WRITE_BYTES		0x04

#define   MS_TM_NORMAL_WRITE		0x05

#define   MS_TM_AUTO_READ		0x08

#define   MS_TM_AUTO_WRITE		0x0C

#define MS_INT_REG			0xFD44

#define MS_BYTE_CNT			0xFD45

#define MS_SECTOR_CNT_L			0xFD46

#define MS_SECTOR_CNT_H			0xFD47

#define MS_DBUS_H			0xFD48



/* CD_PAD_CTL */

#define CD_DISABLE_MASK			0x07

#define MS_CD_DISABLE			0x04

#define SD_CD_DISABLE			0x02

#define XD_CD_DISABLE			0x01

#define CD_DISABLE			0x07

#define CD_ENABLE			0x00

#define MS_CD_EN_ONLY			0x03

#define SD_CD_EN_ONLY			0x05

#define XD_CD_EN_ONLY			0x06

#define FORCE_CD_LOW_MASK		0x38

#define FORCE_CD_XD_LOW			0x08

#define FORCE_CD_SD_LOW			0x10

#define FORCE_CD_MS_LOW			0x20

#define CD_AUTO_DISABLE			0x40

#define SD_CFG1				0xFDA0

#define   SD_CLK_DIVIDE_0		0x00

#define   SD_CLK_DIVIDE_256		0xC0

#define   SD_CLK_DIVIDE_128		0x80

#define   SD_BUS_WIDTH_1BIT		0x00

#define   SD_BUS_WIDTH_4BIT		0x01

#define   SD_BUS_WIDTH_8BIT		0x02

#define   SD_ASYNC_FIFO_NOT_RST		0x10

#define   SD_20_MODE			0x00

#define   SD_DDR_MODE			0x04

#define   SD_30_MODE			0x08

#define   SD_CLK_DIVIDE_MASK		0xC0

#define SD_CFG2				0xFDA1

#define   SD_CALCULATE_CRC7		0x00

#define   SD_NO_CALCULATE_CRC7		0x80

#define   SD_CHECK_CRC16		0x00

#define   SD_NO_CHECK_CRC16		0x40

#define   SD_NO_CHECK_WAIT_CRC_TO	0x20

#define   SD_WAIT_BUSY_END		0x08

#define   SD_NO_WAIT_BUSY_END		0x00

#define   SD_CHECK_CRC7			0x00

#define   SD_NO_CHECK_CRC7		0x04

#define   SD_RSP_LEN_0			0x00

#define   SD_RSP_LEN_6			0x01

#define   SD_RSP_LEN_17			0x02

#define   SD_RSP_TYPE_R0		0x04

#define   SD_RSP_TYPE_R1		0x01

#define   SD_RSP_TYPE_R1b		0x09

#define   SD_RSP_TYPE_R2		0x02

#define   SD_RSP_TYPE_R3		0x05

#define   SD_RSP_TYPE_R4		0x05

#define   SD_RSP_TYPE_R5		0x01

#define   SD_RSP_TYPE_R6		0x01

#define   SD_RSP_TYPE_R7		0x01

#define SD_CFG3				0xFDA2

#define   SD_RSP_80CLK_TIMEOUT_EN	0x01



/* SD_STAT1 */

#define SD_STAT1			0xFDA3

#define   SD_CRC7_ERR			0x80

#define   SD_CRC16_ERR			0x40

#define   SD_CRC_WRITE_ERR		0x20

#define   SD_CRC_WRITE_ERR_MASK		0x1C

#define   GET_CRC_TIME_OUT		0x02

#define   SD_TUNING_COMPARE_ERR		0x01



/* SD_STAT2 */

#define SD_STAT2			0xFDA4

#define   SD_RSP_80CLK_TIMEOUT		0x01



/* SD_BUS_STAT */

#define SD_BUS_STAT			0xFDA5

#define   SD_CLK_TOGGLE_EN		0x80

#define   SD_CLK_FORCE_STOP		0x40

#define   SD_DAT3_STATUS		0x10
@@ -267,16 +246,14 @@ 
#define   SD_DAT1_STATUS		0x04

#define   SD_DAT0_STATUS		0x02

#define   SD_CMD_STATUS			0x01



/* SD_PAD_CTL */

#define SD_PAD_CTL			0xFDA6

#define   SD_IO_USING_1V8		0x80

#define   SD_IO_USING_3V3		0x7F

#define   TYPE_A_DRIVING		0x00

#define   TYPE_B_DRIVING		0x01

#define   TYPE_C_DRIVING		0x02

#define   TYPE_D_DRIVING		0x03



/* SD_SAMPLE_POINT_CTL */

#define SD_SAMPLE_POINT_CTL		0xFDA7

#define   DDR_FIX_RX_DAT		0x00

#define   DDR_VAR_RX_DAT		0x80

#define   DDR_FIX_RX_DAT_EDGE		0x00
@@ -288,8 +265,7 @@ 
#define   SD20_RX_POS_EDGE		0x00

#define   SD20_RX_14_DELAY		0x08

#define SD20_RX_SEL_MASK		0x08



/* SD_PUSH_POINT_CTL */

#define SD_PUSH_POINT_CTL		0xFDA8

#define   DDR_FIX_TX_CMD_DAT		0x00

#define   DDR_VAR_TX_CMD_DAT		0x80

#define   DDR_FIX_TX_DAT_14_TSU		0x00
@@ -300,13 +276,22 @@ 
#define   SD20_TX_14_AHEAD		0x10

#define   SD20_TX_SEL_MASK		0x10

#define   DDR_VAR_SDCLK_POL_SWAP	0x01



/* SD_TRANSFER */

#define SD_CMD0				0xFDA9

#define   SD_CMD_START			0x40

#define SD_CMD1				0xFDAA

#define SD_CMD2				0xFDAB

#define SD_CMD3				0xFDAC

#define SD_CMD4				0xFDAD

#define SD_CMD5				0xFDAE

#define SD_BYTE_CNT_L			0xFDAF

#define SD_BYTE_CNT_H			0xFDB0

#define SD_BLOCK_CNT_L			0xFDB1

#define SD_BLOCK_CNT_H			0xFDB2

#define SD_TRANSFER			0xFDB3

#define   SD_TRANSFER_START		0x80

#define   SD_TRANSFER_END		0x40

#define   SD_STAT_IDLE			0x20

#define   SD_TRANSFER_ERR		0x10

/* SD Transfer Mode definition */

#define   SD_TM_NORMAL_WRITE		0x00

#define   SD_TM_AUTO_WRITE_3		0x01

#define   SD_TM_AUTO_WRITE_4		0x02
@@ -319,183 +304,59 @@ 
#define   SD_TM_AUTO_READ_1		0x0D

#define   SD_TM_AUTO_READ_2		0x0E

#define   SD_TM_AUTO_TUNING		0x0F



/* SD_VPTX_CTL / SD_VPRX_CTL */

#define PHASE_CHANGE			0x80

#define PHASE_NOT_RESET			0x40



/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */

#define DCMPS_CHANGE			0x80

#define DCMPS_CHANGE_DONE		0x40

#define DCMPS_ERROR			0x20

#define DCMPS_CURRENT_PHASE		0x1F



/* SD Configure 1 Register */

#define SD_CLK_DIVIDE_0			0x00

#define SD_CLK_DIVIDE_256		0xC0

#define SD_CLK_DIVIDE_128		0x80

#define SD_BUS_WIDTH_1BIT		0x00

#define SD_BUS_WIDTH_4BIT		0x01

#define SD_BUS_WIDTH_8BIT		0x02

#define SD_ASYNC_FIFO_NOT_RST		0x10

#define SD_20_MODE			0x00

#define SD_DDR_MODE			0x04

#define SD_30_MODE			0x08



#define SD_CLK_DIVIDE_MASK		0xC0



/* SD_CMD_STATE */

#define SD_CMD_STATE			0xFDB5

#define   SD_CMD_IDLE			0x80



/* SD_DATA_STATE */

#define SD_DATA_STATE			0xFDB6

#define   SD_DATA_IDLE			0x80



/* DCM_DRP_CTL */

#define SRCTL				0xFC13



#define DCM_DRP_CTL			0xFC23

#define   DCM_RESET			0x08

#define   DCM_LOCKED			0x04

#define   DCM_208M			0x00

#define   DCM_TX			0x01

#define   DCM_RX			0x02



/* DCM_DRP_TRIG */

#define DCM_DRP_TRIG			0xFC24

#define   DRP_START			0x80

#define   DRP_DONE			0x40



/* DCM_DRP_CFG */

#define DCM_DRP_CFG			0xFC25

#define   DRP_WRITE			0x80

#define   DRP_READ			0x00

#define   DCM_WRITE_ADDRESS_50		0x50

#define   DCM_WRITE_ADDRESS_51		0x51

#define   DCM_READ_ADDRESS_00		0x00

#define   DCM_READ_ADDRESS_51		0x51



/* IRQSTAT0 */

#define DMA_DONE_INT			0x80

#define SUSPEND_INT			0x40

#define LINK_RDY_INT			0x20

#define LINK_DOWN_INT			0x10



/* DMACTL */

#define DMA_RST				0x80

#define DMA_BUSY			0x04

#define DMA_DIR_TO_CARD			0x00

#define DMA_DIR_FROM_CARD		0x02

#define DMA_EN				0x01

#define DMA_128				(0 << 4)

#define DMA_256				(1 << 4)

#define DMA_512				(2 << 4)

#define DMA_1024			(3 << 4)

#define DMA_PACK_SIZE_MASK		0x30



/* SSC_CTL1 */

#define SSC_RSTB			0x80

#define SSC_8X_EN			0x40

#define SSC_FIX_FRAC			0x20

#define SSC_SEL_1M			0x00

#define SSC_SEL_2M			0x08

#define SSC_SEL_4M			0x10

#define SSC_SEL_8M			0x18



/* SSC_CTL2 */

#define SSC_DEPTH_MASK			0x07

#define SSC_DEPTH_DISALBE		0x00

#define SSC_DEPTH_4M			0x01

#define SSC_DEPTH_2M			0x02

#define SSC_DEPTH_1M			0x03

#define SSC_DEPTH_500K			0x04

#define SSC_DEPTH_250K			0x05



/* System Clock Control Register */

#define CLK_LOW_FREQ			0x01



/* System Clock Divider Register */

#define CLK_DIV_1			0x01

#define CLK_DIV_2			0x02

#define CLK_DIV_4			0x03

#define CLK_DIV_8			0x04



/* MS_CFG */

#define SAMPLE_TIME_RISING		0x00

#define SAMPLE_TIME_FALLING		0x80

#define PUSH_TIME_DEFAULT		0x00

#define PUSH_TIME_ODD			0x40

#define NO_EXTEND_TOGGLE		0x00

#define EXTEND_TOGGLE_CHK		0x20

#define MS_BUS_WIDTH_1			0x00

#define MS_BUS_WIDTH_4			0x10

#define MS_BUS_WIDTH_8			0x18

#define MS_2K_SECTOR_MODE		0x04

#define MS_512_SECTOR_MODE		0x00

#define MS_TOGGLE_TIMEOUT_EN		0x00

#define MS_TOGGLE_TIMEOUT_DISEN		0x01

#define MS_NO_CHECK_INT			0x02



/* MS_TRANS_CFG */

#define WAIT_INT			0x80

#define NO_WAIT_INT			0x00

#define NO_AUTO_READ_INT_REG		0x00

#define AUTO_READ_INT_REG		0x40

#define MS_CRC16_ERR			0x20

#define MS_RDY_TIMEOUT			0x10

#define MS_INT_CMDNK			0x08

#define MS_INT_BREQ			0x04

#define MS_INT_ERR			0x02

#define MS_INT_CED			0x01



/* MS_TRANSFER */

#define MS_TRANSFER_START		0x80

#define MS_TRANSFER_END			0x40

#define MS_TRANSFER_ERR			0x20

#define MS_BS_STATE			0x10

#define MS_TM_READ_BYTES		0x00

#define MS_TM_NORMAL_READ		0x01

#define MS_TM_WRITE_BYTES		0x04

#define MS_TM_NORMAL_WRITE		0x05

#define MS_TM_AUTO_READ			0x08

#define MS_TM_AUTO_WRITE		0x0C



/* SD Configure 2 Register */

#define SD_CALCULATE_CRC7		0x00

#define SD_NO_CALCULATE_CRC7		0x80

#define SD_CHECK_CRC16			0x00

#define SD_NO_CHECK_CRC16		0x40

#define SD_NO_CHECK_WAIT_CRC_TO		0x20

#define SD_WAIT_BUSY_END		0x08

#define SD_NO_WAIT_BUSY_END		0x00

#define SD_CHECK_CRC7			0x00

#define SD_NO_CHECK_CRC7		0x04

#define SD_RSP_LEN_0			0x00

#define SD_RSP_LEN_6			0x01

#define SD_RSP_LEN_17			0x02

/* SD/MMC Response Type Definition */

#define SD_RSP_TYPE_R0			0x04

#define SD_RSP_TYPE_R1			0x01

#define SD_RSP_TYPE_R1b			0x09

#define SD_RSP_TYPE_R2			0x02

#define SD_RSP_TYPE_R3			0x05

#define SD_RSP_TYPE_R4			0x05

#define SD_RSP_TYPE_R5			0x01

#define SD_RSP_TYPE_R6			0x01

#define SD_RSP_TYPE_R7			0x01



/* SD_CONFIGURE3 */

#define SD_RSP_80CLK_TIMEOUT_EN		0x01



/* Card Transfer Reset Register */

#define SPI_STOP			0x01

#define XD_STOP				0x02

#define SD_STOP				0x04

#define MS_STOP				0x08

#define SPI_CLR_ERR			0x10

#define XD_CLR_ERR			0x20

#define SD_CLR_ERR			0x40

#define MS_CLR_ERR			0x80



/* Card Data Source Register */

#define PINGPONG_BUFFER			0x01

#define RING_BUFFER			0x00



/* Card Power Control Register */

#define DCM_DRP_WR_DATA_L		0xFC26

#define DCM_DRP_WR_DATA_H		0xFC27

#define DCM_DRP_RD_DATA_L		0xFC28

#define DCM_DRP_RD_DATA_H		0xFC29

#define SD_VPCLK0_CTL			0xFC2A

#define SD_VPCLK1_CTL			0xFC2B

#define SD_DCMPS0_CTL			0xFC2C

#define SD_DCMPS1_CTL			0xFC2D

#define SD_VPTX_CTL			SD_VPCLK0_CTL

#define SD_VPRX_CTL			SD_VPCLK1_CTL

#define   PHASE_CHANGE			0x80

#define   PHASE_NOT_RESET		0x40

#define SD_DCMPS_TX_CTL			SD_DCMPS0_CTL

#define SD_DCMPS_RX_CTL			SD_DCMPS1_CTL

#define   DCMPS_CHANGE			0x80

#define   DCMPS_CHANGE_DONE		0x40

#define   DCMPS_ERROR			0x20

#define   DCMPS_CURRENT_PHASE		0x1F

#define CARD_CLK_SOURCE			0xFC2E

#define   CRC_FIX_CLK			(0x00 << 0)

#define   CRC_VAR_CLK0			(0x01 << 0)

#define   CRC_VAR_CLK1			(0x02 << 0)

#define   SD30_FIX_CLK			(0x00 << 2)

#define   SD30_VAR_CLK0			(0x01 << 2)

#define   SD30_VAR_CLK1			(0x02 << 2)

#define   SAMPLE_FIX_CLK		(0x00 << 4)

#define   SAMPLE_VAR_CLK0		(0x01 << 4)

#define   SAMPLE_VAR_CLK1		(0x02 << 4)

#define CARD_PWR_CTL			0xFD50

#define   PMOS_STRG_MASK		0x10

#define   PMOS_STRG_800mA		0x10

#define   PMOS_STRG_400mA		0x00
@@ -515,114 +376,115 @@ 
#define   BPP_POWER_MASK		0x0F

#define   SD_VCC_PARTIAL_POWER_ON	0x02

#define   SD_VCC_POWER_ON		0x00



/* PWR_GATE_CTRL */

#define PWR_GATE_EN			0x01

#define LDO3318_PWR_MASK		0x06

#define LDO_ON				0x00

#define LDO_SUSPEND			0x04

#define LDO_OFF				0x06



/* CARD_CLK_SOURCE */

#define CRC_FIX_CLK			(0x00 << 0)

#define CRC_VAR_CLK0			(0x01 << 0)

#define CRC_VAR_CLK1			(0x02 << 0)

#define SD30_FIX_CLK			(0x00 << 2)

#define SD30_VAR_CLK0			(0x01 << 2)

#define SD30_VAR_CLK1			(0x02 << 2)

#define SAMPLE_FIX_CLK			(0x00 << 4)

#define SAMPLE_VAR_CLK0			(0x01 << 4)

#define SAMPLE_VAR_CLK1			(0x02 << 4)



/* HOST_SLEEP_STATE */

#define HOST_ENTER_S1			1

#define HOST_ENTER_S3			2



#define MS_CFG				0xFD40

#define MS_TPC				0xFD41

#define MS_TRANS_CFG			0xFD42

#define MS_TRANSFER			0xFD43

#define MS_INT_REG			0xFD44

#define MS_BYTE_CNT			0xFD45

#define MS_SECTOR_CNT_L			0xFD46

#define MS_SECTOR_CNT_H			0xFD47

#define MS_DBUS_H			0xFD48



#define SD_CFG1				0xFDA0

#define SD_CFG2				0xFDA1

#define SD_CFG3				0xFDA2

#define SD_STAT1			0xFDA3

#define SD_STAT2			0xFDA4

#define SD_BUS_STAT			0xFDA5

#define SD_PAD_CTL			0xFDA6

#define SD_SAMPLE_POINT_CTL		0xFDA7

#define SD_PUSH_POINT_CTL		0xFDA8

#define SD_CMD0				0xFDA9

#define   SD_CMD_START			0x40

#define SD_CMD1				0xFDAA

#define SD_CMD2				0xFDAB

#define SD_CMD3				0xFDAC

#define SD_CMD4				0xFDAD

#define SD_CMD5				0xFDAE

#define SD_BYTE_CNT_L			0xFDAF

#define SD_BYTE_CNT_H			0xFDB0

#define SD_BLOCK_CNT_L			0xFDB1

#define SD_BLOCK_CNT_H			0xFDB2

#define SD_TRANSFER			0xFDB3

#define SD_CMD_STATE			0xFDB5

#define SD_DATA_STATE			0xFDB6



#define SRCTL				0xFC13



#define DCM_DRP_CTL			0xFC23

#define DCM_DRP_TRIG			0xFC24

#define DCM_DRP_CFG			0xFC25

#define DCM_DRP_WR_DATA_L		0xFC26

#define DCM_DRP_WR_DATA_H		0xFC27

#define DCM_DRP_RD_DATA_L		0xFC28

#define DCM_DRP_RD_DATA_H		0xFC29

#define SD_VPCLK0_CTL			0xFC2A

#define SD_VPCLK1_CTL			0xFC2B

#define SD_DCMPS0_CTL			0xFC2C

#define SD_DCMPS1_CTL			0xFC2D

#define SD_VPTX_CTL			SD_VPCLK0_CTL

#define SD_VPRX_CTL			SD_VPCLK1_CTL

#define SD_DCMPS_TX_CTL			SD_DCMPS0_CTL

#define SD_DCMPS_RX_CTL			SD_DCMPS1_CTL

#define CARD_CLK_SOURCE			0xFC2E



#define CARD_PWR_CTL			0xFD50

#define CARD_CLK_SWITCH			0xFD51

#define RTL8411B_PACKAGE_MODE		0xFD51

#define CARD_SHARE_MODE			0xFD52

#define   CARD_SHARE_MASK		0x0F

#define   CARD_SHARE_MULTI_LUN		0x00

#define   CARD_SHARE_NORMAL		0x00

#define   CARD_SHARE_48_SD		0x04

#define   CARD_SHARE_48_MS		0x08

#define   CARD_SHARE_BAROSSA_SD		0x01

#define   CARD_SHARE_BAROSSA_MS		0x02

#define CARD_DRIVE_SEL			0xFD53

#define   MS_DRIVE_8mA			(0x01 << 6)

#define   MMC_DRIVE_8mA			(0x01 << 4)

#define   XD_DRIVE_8mA			(0x01 << 2)

#define   GPIO_DRIVE_8mA		0x01

#define RTS5209_CARD_DRIVE_DEFAULT	(MS_DRIVE_8mA | MMC_DRIVE_8mA |\

					XD_DRIVE_8mA | GPIO_DRIVE_8mA)

#define RTL8411_CARD_DRIVE_DEFAULT	(MS_DRIVE_8mA | MMC_DRIVE_8mA |\

					XD_DRIVE_8mA)

#define RTSX_CARD_DRIVE_DEFAULT		(MS_DRIVE_8mA | GPIO_DRIVE_8mA)



#define CARD_STOP			0xFD54

#define   SPI_STOP			0x01

#define   XD_STOP			0x02

#define   SD_STOP			0x04

#define   MS_STOP			0x08

#define   SPI_CLR_ERR			0x10

#define   XD_CLR_ERR			0x20

#define   SD_CLR_ERR			0x40

#define   MS_CLR_ERR			0x80

#define CARD_OE				0xFD55

#define   SD_OUTPUT_EN			0x04

#define   MS_OUTPUT_EN			0x08

#define CARD_AUTO_BLINK			0xFD56

#define CARD_GPIO_DIR			0xFD57

#define CARD_GPIO			0xFD58

#define CARD_DATA_SOURCE		0xFD5B

#define   PINGPONG_BUFFER		0x01

#define   RING_BUFFER			0x00

#define SD30_CLK_DRIVE_SEL		0xFD5A

#define   DRIVER_TYPE_A			0x05

#define   DRIVER_TYPE_B			0x03

#define   DRIVER_TYPE_C			0x02

#define   DRIVER_TYPE_D			0x01

#define CARD_SELECT			0xFD5C

#define   SD_MOD_SEL			2

#define   MS_MOD_SEL			3

#define SD30_DRIVE_SEL			0xFD5E

#define   CFG_DRIVER_TYPE_A		0x02

#define   CFG_DRIVER_TYPE_B		0x03

#define   CFG_DRIVER_TYPE_C		0x01

#define   CFG_DRIVER_TYPE_D		0x00

#define SD30_CMD_DRIVE_SEL		0xFD5E

#define SD30_DAT_DRIVE_SEL		0xFD5F

#define CARD_CLK_EN			0xFD69

#define   SD_CLK_EN			0x04

#define   MS_CLK_EN			0x08

#define SDIO_CTRL			0xFD6B

#define CD_PAD_CTL			0xFD73



#define   CD_DISABLE_MASK		0x07

#define   MS_CD_DISABLE			0x04

#define   SD_CD_DISABLE			0x02

#define   XD_CD_DISABLE			0x01

#define   CD_DISABLE			0x07

#define   CD_ENABLE			0x00

#define   MS_CD_EN_ONLY			0x03

#define   SD_CD_EN_ONLY			0x05

#define   XD_CD_EN_ONLY			0x06

#define   FORCE_CD_LOW_MASK		0x38

#define   FORCE_CD_XD_LOW		0x08

#define   FORCE_CD_SD_LOW		0x10

#define   FORCE_CD_MS_LOW		0x20

#define   CD_AUTO_DISABLE		0x40

#define FPDCTL				0xFC00

#define   SSC_POWER_DOWN		0x01

#define   SD_OC_POWER_DOWN		0x02

#define   ALL_POWER_DOWN		0x07

#define   OC_POWER_DOWN			0x06

#define PDINFO				0xFC01



#define CLK_CTL				0xFC02

#define   CHANGE_CLK			0x01

#define   CLK_LOW_FREQ			0x01



#define CLK_DIV				0xFC03

#define   CLK_DIV_1			0x01

#define   CLK_DIV_2			0x02

#define   CLK_DIV_4			0x03

#define   CLK_DIV_8			0x04

#define CLK_SEL				0xFC04



#define SSC_DIV_N_0			0xFC0F

#define SSC_DIV_N_1			0xFC10

#define SSC_CTL1			0xFC11

#define    SSC_RSTB			0x80

#define    SSC_8X_EN			0x40

#define    SSC_FIX_FRAC			0x20

#define    SSC_SEL_1M			0x00

#define    SSC_SEL_2M			0x08

#define    SSC_SEL_4M			0x10

#define    SSC_SEL_8M			0x18

#define SSC_CTL2			0xFC12



#define    SSC_DEPTH_MASK		0x07

#define    SSC_DEPTH_DISALBE		0x00

#define    SSC_DEPTH_4M			0x01

#define    SSC_DEPTH_2M			0x02

#define    SSC_DEPTH_1M			0x03

#define    SSC_DEPTH_500K		0x04

#define    SSC_DEPTH_250K		0x05

#define RCCTL				0xFC14



#define FPGA_PULL_CTL			0xFC1D
@@ -630,6 +492,24 @@ 
#define GPIO_CTL			0xFC1F



#define LDO_CTL				0xFC1E

#define   BPP_ASIC_1V7			0x00

#define   BPP_ASIC_1V8			0x01

#define   BPP_ASIC_1V9			0x02

#define   BPP_ASIC_2V0			0x03

#define   BPP_ASIC_2V7			0x04

#define   BPP_ASIC_2V8			0x05

#define   BPP_ASIC_3V2			0x06

#define   BPP_ASIC_3V3			0x07

#define   BPP_REG_TUNED18		0x07

#define   BPP_TUNED18_SHIFT_8402	5

#define   BPP_TUNED18_SHIFT_8411	4

#define   BPP_PAD_MASK			0x04

#define   BPP_PAD_3V3			0x04

#define   BPP_PAD_1V8			0x00

#define   BPP_LDO_POWB			0x03

#define   BPP_LDO_ON			0x00

#define   BPP_LDO_SUSPEND		0x02

#define   BPP_LDO_OFF			0x03

#define SYS_VER				0xFC32



#define CARD_PULL_CTL1			0xFD60
@@ -642,6 +522,10 @@ 
/* PCI Express Related Registers */

#define IRQEN0				0xFE20

#define IRQSTAT0			0xFE21

#define    DMA_DONE_INT			0x80

#define    SUSPEND_INT			0x40

#define    LINK_RDY_INT			0x20

#define    LINK_DOWN_INT		0x10

#define IRQEN1				0xFE22

#define IRQSTAT1			0xFE23

#define TLPRIEN				0xFE24
@@ -653,6 +537,16 @@ 
#define DMATC2				0xFE2A

#define DMATC3				0xFE2B

#define DMACTL				0xFE2C

#define   DMA_RST			0x80

#define   DMA_BUSY			0x04

#define   DMA_DIR_TO_CARD		0x00

#define   DMA_DIR_FROM_CARD		0x02

#define   DMA_EN			0x01

#define   DMA_128			(0 << 4)

#define   DMA_256			(1 << 4)

#define   DMA_512			(2 << 4)

#define   DMA_1024			(3 << 4)

#define   DMA_PACK_SIZE_MASK		0x30

#define BCTL				0xFE2D

#define RBBC0				0xFE2E

#define RBBC1				0xFE2F
@@ -693,11 +587,19 @@ 
#define RESET_LOAD_REG			0xFE5E

#define EFUSE_CONTENT			0xFE5F

#define HOST_SLEEP_STATE		0xFE60

#define   HOST_ENTER_S1			1

#define   HOST_ENTER_S3			2



#define SDIO_CFG			0xFE70



#define NFTS_TX_CTRL			0xFE72



#define PWR_GATE_CTRL			0xFE75

#define   PWR_GATE_EN			0x01

#define   LDO3318_PWR_MASK		0x06

#define   LDO_ON			0x00

#define   LDO_SUSPEND			0x04

#define   LDO_OFF			0x06

#define PWD_SUSPEND_EN			0xFE76

#define LDO_PWR_SEL			0xFE78