Commit c298438a authored by Thierry Reding's avatar Thierry Reding
Browse files

ARM: tegra: Remove reset-names for UART devices 



The UART devices found on Tegra chips have a single reset connected to
them, so a reset-names property isn't needed. In fact, the device tree
bindings don't allow this property, so remove them to allow the nodes
to be properly validated.

Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 9766116a

arch/arm/boot/dts/nvidia/tegra114.dtsi

+0 −4
Original line number Diff line number Diff line
@@ -315,7 +315,6 @@ uarta: serial@70006000 { 
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA114_CLK_UARTA>;

		resets = <&tegra_car 6>;

		reset-names = "serial";

		dmas = <&apbdma 8>, <&apbdma 8>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -328,7 +327,6 @@ uartb: serial@70006040 { 
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA114_CLK_UARTB>;

		resets = <&tegra_car 7>;

		reset-names = "serial";

		dmas = <&apbdma 9>, <&apbdma 9>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -341,7 +339,6 @@ uartc: serial@70006200 { 
		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA114_CLK_UARTC>;

		resets = <&tegra_car 55>;

		reset-names = "serial";

		dmas = <&apbdma 10>, <&apbdma 10>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -354,7 +351,6 @@ uartd: serial@70006300 { 
		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA114_CLK_UARTD>;

		resets = <&tegra_car 65>;

		reset-names = "serial";

		dmas = <&apbdma 19>, <&apbdma 19>;

		dma-names = "rx", "tx";

		status = "disabled";

arch/arm/boot/dts/nvidia/tegra124.dtsi

+0 −4
Original line number Diff line number Diff line
@@ -380,7 +380,6 @@ uarta: serial@70006000 { 
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA124_CLK_UARTA>;

		resets = <&tegra_car 6>;

		reset-names = "serial";

		dmas = <&apbdma 8>, <&apbdma 8>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -393,7 +392,6 @@ uartb: serial@70006040 { 
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA124_CLK_UARTB>;

		resets = <&tegra_car 7>;

		reset-names = "serial";

		dmas = <&apbdma 9>, <&apbdma 9>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -406,7 +404,6 @@ uartc: serial@70006200 { 
		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA124_CLK_UARTC>;

		resets = <&tegra_car 55>;

		reset-names = "serial";

		dmas = <&apbdma 10>, <&apbdma 10>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -419,7 +416,6 @@ uartd: serial@70006300 { 
		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA124_CLK_UARTD>;

		resets = <&tegra_car 65>;

		reset-names = "serial";

		dmas = <&apbdma 19>, <&apbdma 19>;

		dma-names = "rx", "tx";

		status = "disabled";

arch/arm/boot/dts/nvidia/tegra20.dtsi

+0 −5
Original line number Diff line number Diff line
@@ -442,7 +442,6 @@ uarta: serial@70006000 { 
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA20_CLK_UARTA>;

		resets = <&tegra_car 6>;

		reset-names = "serial";

		dmas = <&apbdma 8>, <&apbdma 8>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -455,7 +454,6 @@ uartb: serial@70006040 { 
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA20_CLK_UARTB>;

		resets = <&tegra_car 7>;

		reset-names = "serial";

		dmas = <&apbdma 9>, <&apbdma 9>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -468,7 +466,6 @@ uartc: serial@70006200 { 
		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA20_CLK_UARTC>;

		resets = <&tegra_car 55>;

		reset-names = "serial";

		dmas = <&apbdma 10>, <&apbdma 10>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -481,7 +478,6 @@ uartd: serial@70006300 { 
		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA20_CLK_UARTD>;

		resets = <&tegra_car 65>;

		reset-names = "serial";

		dmas = <&apbdma 19>, <&apbdma 19>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -494,7 +490,6 @@ uarte: serial@70006400 { 
		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA20_CLK_UARTE>;

		resets = <&tegra_car 66>;

		reset-names = "serial";

		dmas = <&apbdma 20>, <&apbdma 20>;

		dma-names = "rx", "tx";

		status = "disabled";

arch/arm/boot/dts/nvidia/tegra30.dtsi

+0 −5
Original line number Diff line number Diff line
@@ -563,7 +563,6 @@ uarta: serial@70006000 { 
		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA30_CLK_UARTA>;

		resets = <&tegra_car 6>;

		reset-names = "serial";

		dmas = <&apbdma 8>, <&apbdma 8>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -576,7 +575,6 @@ uartb: serial@70006040 { 
		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA30_CLK_UARTB>;

		resets = <&tegra_car 7>;

		reset-names = "serial";

		dmas = <&apbdma 9>, <&apbdma 9>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -589,7 +587,6 @@ uartc: serial@70006200 { 
		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA30_CLK_UARTC>;

		resets = <&tegra_car 55>;

		reset-names = "serial";

		dmas = <&apbdma 10>, <&apbdma 10>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -602,7 +599,6 @@ uartd: serial@70006300 { 
		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA30_CLK_UARTD>;

		resets = <&tegra_car 65>;

		reset-names = "serial";

		dmas = <&apbdma 19>, <&apbdma 19>;

		dma-names = "rx", "tx";

		status = "disabled";
@@ -615,7 +611,6 @@ uarte: serial@70006400 { 
		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;

		clocks = <&tegra_car TEGRA30_CLK_UARTE>;

		resets = <&tegra_car 66>;

		reset-names = "serial";

		dmas = <&apbdma 20>, <&apbdma 20>;

		dma-names = "rx", "tx";

		status = "disabled";