Commit ce1b5eb7 authored by Luca Weiss's avatar Luca Weiss Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: pm6150l: add temp sensor and thermal zone config 



Add temp-alarm device tree node and a default configuration for the
corresponding thermal zone for this PMIC. Temperatures are based on
downstream values, except for trip2 where 125°C is used instead of 145°C
due to limitations without a configured ADC.

Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221028075405.124809-2-luca.weiss@fairphone.com
parent 16c0c46f

arch/arm64/boot/dts/qcom/pm6150l.dtsi

+38 −0
Original line number Diff line number Diff line
@@ -5,6 +5,37 @@ 
#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/spmi/spmi.h>



/ {

	thermal-zones {

		pm6150l-thermal {

			polling-delay-passive = <0>;

			polling-delay = <0>;



			thermal-sensors = <&pm6150l_temp>;



			trips {

				trip0 {

					temperature = <95000>;

					hysteresis = <0>;

					type = "passive";

				};



				trip1 {

					temperature = <115000>;

					hysteresis = <0>;

					type = "hot";

				};



				trip2 {

					temperature = <125000>;

					hysteresis = <0>;

					type = "critical";

				};

			};

		};

	};

};



&spmi_bus {

	pm6150l_lsid4: pmic@4 {

		compatible = "qcom,pm6150l", "qcom,spmi-pmic";
@@ -12,6 +43,13 @@ pm6150l_lsid4: pmic@4 { 
		#address-cells = <1>;

		#size-cells = <0>;



		pm6150l_temp: temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400>;

			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;

			#thermal-sensor-cells = <0>;

		};



		pm6150l_adc: adc@3100 {

			compatible = "qcom,spmi-adc5";

			reg = <0x3100>;