ARM: dts: add Kverneland UT1, UT1Q and UT1P (db8c29ba) · Commits · jan.koester / Linux

arch/arm/boot/dts/Makefile

+3 −0

Original line number	Diff line number	Diff line
		@@ -490,6 +490,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
		imx6dl-tx6u-811x.dtb \
		imx6dl-tx6u-81xx-mb7.dtb \
		imx6dl-udoo.dtb \
		imx6dl-vicut1.dtb \
		imx6dl-wandboard.dtb \
		imx6dl-wandboard-revb1.dtb \
		imx6dl-wandboard-revd1.dtb \
		@@ -583,6 +584,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
		imx6q-udoo.dtb \
		imx6q-utilite-pro.dtb \
		imx6q-var-dt6customboard.dtb \
		imx6q-vicut1.dtb \
		imx6q-wandboard.dtb \
		imx6q-wandboard-revb1.dtb \
		imx6q-wandboard-revd1.dtb \
		@@ -597,6 +599,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
		imx6qp-tx6qp-8037-mb7.dtb \
		imx6qp-tx6qp-8137.dtb \
		imx6qp-tx6qp-8137-mb7.dtb \
		imx6qp-vicutp.dtb \
		imx6qp-wandboard-revd1.dtb \
		imx6qp-zii-rdu2.dtb
		dtb-$(CONFIG_SOC_IMX6SL) += \

arch/arm/boot/dts/imx6dl-vicut1.dts

0 → 100644

+13 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
		/*
		* Copyright (c) 2014 Protonic Holland
		*/

		/dts-v1/;
		#include "imx6dl.dtsi"
		#include "imx6qdl-vicut1.dtsi"

		/ {
		model = "Kverneland UT1 Board";
		compatible = "kvg,vicut1", "fsl,imx6dl";
		};

arch/arm/boot/dts/imx6q-vicut1.dts

0 → 100644

+17 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
		/*
		* Copyright (c) 2014 Protonic Holland
		*/

		/dts-v1/;
		#include "imx6q.dtsi"
		#include "imx6qdl-vicut1.dtsi"

		/ {
		model = "Kverneland UT1Q Board";
		compatible = "kvg,vicut1q", "fsl,imx6q";
		};

		&sata {
		status = "okay";
		};

arch/arm/boot/dts/imx6qdl-vicut1.dtsi

0 → 100644

+803 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
		/*
		* Copyright (c) 2014 Protonic Holland
		* Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
		*/

		#include <dt-bindings/display/sdtv-standards.h>
		#include <dt-bindings/gpio/gpio.h>
		#include <dt-bindings/input/input.h>
		#include <dt-bindings/leds/common.h>
		#include <dt-bindings/media/tvp5150.h>
		#include <dt-bindings/sound/fsl-imx-audmux.h>

		/ {
		chosen {
		stdout-path = &uart4;
		};

		backlight: backlight {
		compatible = "pwm-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_backlight>;
		pwms = <&pwm1 0 5000000 0>;
		brightness-levels = <0 16 64 255>;
		num-interpolated-steps = <16>;
		default-brightness-level = <1>;
		power-supply = <&reg_3v3>;
		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
		};

		connector {
		compatible = "composite-video-connector";
		label = "Composite0";
		sdtv-standards = <SDTV_STD_PAL_B>;

		port {
		comp0_out: endpoint {
		remote-endpoint = <&tvp5150_comp0_in>;
		};
		};
		};

		gpio-keys {
		compatible = "gpio-keys";
		autorepeat;

		power {
		label = "Power Button";
		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
		linux,code = <KEY_POWER>;
		wakeup-source;
		};
		};

		leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_leds>;

		led-0 {
		label = "LED_DI0_DEBUG_0";
		function = LED_FUNCTION_HEARTBEAT;
		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
		linux,default-trigger = "heartbeat";
		};

		led-1 {
		label = "LED_DI0_DEBUG_1";
		function = LED_FUNCTION_DISK;
		gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
		linux,default-trigger = "disk-activity";
		};

		led-2 {
		label = "POWER_LED";
		function = LED_FUNCTION_POWER;
		gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
		default-state = "on";
		};
		};

		panel {
		compatible = "kyo,tcg121xglp";
		backlight = <&backlight>;
		power-supply = <&reg_3v3>;

		port {
		panel_in: endpoint {
		remote-endpoint = <&lvds0_out>;
		};
		};
		};

		reg_1v8: regulator-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		};

		reg_3v3: regulator-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		};

		reg_h1_vbus: regulator-h1-vbus {
		compatible = "regulator-fixed";
		regulator-name = "h1-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		};

		reg_otg_vbus: regulator-otg-vbus {
		compatible = "regulator-fixed";
		regulator-name = "otg-vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		};

		reg_wifi: regulator-wifi {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_wifi_npd>;
		regulator-name = "wifi";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		startup-delay-us = <70000>;
		};

		sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "prti6q-sgtl5000";
		simple-audio-card,format = "i2s";
		simple-audio-card,widgets =
		"Microphone", "Microphone Jack",
		"Line", "Line In Jack",
		"Headphone", "Headphone Jack",
		"Speaker", "External Speaker";
		simple-audio-card,routing =
		"MIC_IN", "Microphone Jack",
		"LINE_IN", "Line In Jack",
		"Headphone Jack", "HP_OUT",
		"External Speaker", "LINE_OUT";

		simple-audio-card,cpu {
		sound-dai = <&ssi1>;
		system-clock-frequency = <0>; /* Do NOT call fsl_ssi_set_dai_sysclk! */
		};

		simple-audio-card,codec {
		sound-dai = <&codec>;
		bitclock-master;
		frame-master;
		};
		};
		};

		&audmux {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_audmux>;
		status = "okay";

		mux-ssi1 {
		fsl,audmux-port = <0>;
		fsl,port-config = <
		IMX_AUDMUX_V2_PTCR_SYN 0
		IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
		IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
		IMX_AUDMUX_V2_PTCR_TFSDIR 0
		IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
		>;
		};

		mux-pins3 {
		fsl,audmux-port = <2>;
		fsl,port-config = <
		IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
		0 IMX_AUDMUX_V2_PDCR_TXRXEN
		>;
		};
		};

		&can1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can1>;
		status = "okay";
		};

		&can2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_can2>;
		status = "okay";
		};

		&clks {
		assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
		assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
		};

		&ecspi1 {
		cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ecspi1>;
		status = "okay";

		flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <20000000>;
		};
		};

		&fec {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_enet>;
		phy-mode = "rgmii-id";
		phy-handle = <&rgmii_phy>;
		status = "okay";

		mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		/* Microchip KSZ9031RNX PHY */
		rgmii_phy: ethernet-phy@0 {
		reg = <0>;
		interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
		reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
		reset-assert-us = <10000>;
		reset-deassert-us = <300>;
		};
		};
		};

		&gpio1 {
		gpio-line-names =
		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
		"CAM2_MIRROR", "", "", "SMBALERT",
		"DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
		"SDIO_D2", "SDIO_D1", "SDIO_D0",
		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
		"SD1_DATA3", "", "",
		"", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
		"WL_IRQ", "ETH_MDC";
		};

		&gpio2 {
		gpio-line-names =
		"", "", "", "", "", "", "", "",
		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
		"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
		"", "", "", "", "", "", "", "ON_SWITCH",
		"POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
		};

		&gpio3 {
		gpio-line-names =
		"", "", "", "", "", "", "", "",
		"", "", "", "", "", "", "", "",
		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
		"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
		"", "", "", "", "", "", "", "";
		};

		&gpio4 {
		gpio-line-names =
		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
		"CAN2_SR", "CAN2_TX", "CAN2_RX",
		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "",
		"", "", "", "", "BL_EN", "BL_PWM", "", "";
		};

		&gpio5 {
		gpio-line-names =
		"", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS",
		"PCIE_RESET", "", "", "", "", "", "", "",
		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
		"I2S_BITCLK", "I2S_DOUT",
		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
		"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
		};

		&gpio6 {
		gpio-line-names =
		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
		"ITU656_D6", "ITU656_D7", "", "",
		"", "", "", "", "", "", "", "",
		"", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
		"RGMII_TD3",
		"RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
		"RGMII_RD2", "RGMII_RD3", "", "";
		};

		&gpio7 {
		gpio-line-names =
		"EMMC_DAT5", "EMMC_DAT4", "EMMC_CMD", "EMMC_CLK", "EMMC_DAT0",
		"EMMC_DAT1", "EMMC_DAT2", "EMMC_DAT3",
		"EMMC_RST", "", "", "", "CAM_DETECT", "", "", "",
		"", "EMMC_DAT7", "EMMC_DAT6", "", "", "", "", "",
		"", "", "", "", "", "", "", "";
		};

		&i2c1 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c1>;
		status = "okay";

		codec: audio-codec@a {
		compatible = "fsl,sgtl5000";
		reg = <0xa>;
		#sound-dai-cells = <0>;
		clocks = <&clks 201>;
		VDDA-supply = <&reg_3v3>;
		VDDIO-supply = <&reg_3v3>;
		VDDD-supply = <&reg_1v8>;
		};

		video-decoder@5c {
		compatible = "ti,tvp5150";
		reg = <0x5c>;
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
		reg = <0>;

		tvp5150_comp0_in: endpoint {
		remote-endpoint = <&comp0_out>;
		};
		};

		/* Output port 2 is video output pad */
		port@2 {
		reg = <2>;

		tvp5151_to_ipu1_csi0_mux: endpoint {
		remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
		};
		};
		};
		};

		&i2c3 {
		clock-frequency = <100000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_i2c3>;
		status = "okay";

		adc@49 {
		compatible = "ti,ads1015";
		reg = <0x49>;
		#address-cells = <1>;
		#size-cells = <0>;

		channel@4 {
		reg = <4>;
		ti,gain = <3>;
		ti,datarate = <3>;
		};

		channel@5 {
		reg = <5>;
		ti,gain = <3>;
		ti,datarate = <3>;
		};

		channel@6 {
		reg = <6>;
		ti,gain = <3>;
		ti,datarate = <3>;
		};

		channel@7 {
		reg = <7>;
		ti,gain = <3>;
		ti,datarate = <3>;
		};
		};

		rtc@51 {
		compatible = "nxp,pcf8563";
		reg = <0x51>;
		};

		temperature-sensor@70 {
		compatible = "ti,tmp103";
		reg = <0x70>;
		};
		};

		&ipu1_csi0 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ipu1_csi0>;
		status = "okay";
		};

		&ipu1_csi0_mux_from_parallel_sensor {
		remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
		};

		&ldb {
		status = "okay";

		lvds-channel@0 {
		status = "okay";

		port@4 {
		reg = <4>;

		lvds0_out: endpoint {
		remote-endpoint = <&panel_in>;
		};
		};
		};
		};

		&pcie {
		status = "okay";
		};

		&pwm1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwm1>;
		status = "okay";
		};

		&ssi1 {
		#sound-dai-cells = <0>;
		fsl,mode = "ac97-slave";
		status = "okay";
		};

		&uart1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart1>;
		status = "okay";
		};

		&uart2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart2>;
		status = "okay";
		};

		&uart3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart3>;
		status = "okay";
		};

		&uart4 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart4>;
		status = "okay";
		};

		&uart5 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_uart5>;
		status = "okay";
		};

		&usbh1 {
		vbus-supply = <&reg_h1_vbus>;
		pinctrl-names = "default";
		phy_type = "utmi";
		dr_mode = "host";
		status = "okay";
		};

		&usbotg {
		vbus-supply = <&reg_otg_vbus>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbotg>;
		phy_type = "utmi";
		dr_mode = "host";
		disable-over-current;
		status = "okay";
		};

		&usdhc1 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc1>;
		cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
		no-1-8-v;
		disable-wp;
		cap-sd-highspeed;
		no-mmc;
		no-sdio;
		status = "okay";
		};

		&usdhc2 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc2>;
		vmmc-supply = <&reg_wifi>;
		non-removable;
		cap-power-off-card;
		keep-power-in-suspend;
		no-1-8-v;
		no-mmc;
		no-sd;
		status = "okay";

		wifi {
		compatible = "ti,wl1271";
		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
		ref-clock-frequency = "38400000";
		tcxo-clock-frequency = "19200000";
		};
		};

		&usdhc3 {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc3>;
		bus-width = <8>;
		no-1-8-v;
		non-removable;
		no-sd;
		no-sdio;
		status = "okay";
		};

		&iomuxc {
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_hog>;

		pinctrl_audmux: audmuxgrp {
		fsl,pins = <
		/* SGTL5000 sys_mclk */
		MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
		MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
		MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
		MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
		MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
		>;
		};

		pinctrl_backlight: backlightgrp {
		fsl,pins = <
		MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
		>;
		};

		pinctrl_can1: can1grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
		MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
		/* CAN1_SR */
		MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
		/* CAN1_TERM */
		MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
		>;
		};

		pinctrl_can2: can2grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
		MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
		/* CAN2_SR */
		MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
		>;
		};

		pinctrl_ecspi1: ecspi1grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
		MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
		MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
		/* CS */
		MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
		>;
		};

		pinctrl_enet: enetgrp {
		fsl,pins = <
		MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
		MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
		MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
		MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
		MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
		MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
		MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
		MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
		MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
		MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
		MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
		MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
		MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
		MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
		MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
		/* Phy reset */
		MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
		>;
		};

		pinctrl_hog: hoggrp {
		fsl,pins = <
		/* ITU656_nRESET */
		MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
		/* CAM1_MIRROR */
		MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
		/* CAM2_MIRROR */
		MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
		/* CAM_nDETECT */
		MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
		/* nON_SWITCH */
		MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
		/* ISB_IN1 */
		MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
		/* ISB_nIN2 */
		MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
		/* WARN_LIGHT */
		MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
		/* ON2_FB */
		MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
		/* YACO_nIRQ */
		MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
		/* YACO_BOOT0 */
		MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
		/* YACO_nRESET */
		MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
		/* FORCE_ON1 */
		MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
		/* AUDIO_nRESET */
		MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
		/* ITU656_nPDN */
		MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0

		/* HW revision detect */
		/* REV_ID0 */
		MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
		/* REV_ID1 */
		MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
		/* REV_ID2 */
		MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
		/* REV_ID3 */
		MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
		/* REV_ID4 */
		MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0

		/* New in HW revision 1 */
		/* ON1_FB */
		MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
		/* DIP1_FB */
		MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0

		/* New in UT2: FIXME: ISB PWM should start off, PD */
		/* ISB_LED_PWM */
		MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0
		>;
		};

		pinctrl_i2c1: i2c1grp {
		fsl,pins = <
		MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
		MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
		>;
		};

		pinctrl_i2c3: i2c3grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
		MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
		>;
		};

		pinctrl_ipu1_csi0: ipu1csi0grp {
		fsl,pins = <
		MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
		MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
		MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
		MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
		MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
		MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
		MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
		MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
		MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
		>;
		};

		pinctrl_leds: ledsgrp {
		fsl,pins = <
		/* DEBUG0 */
		MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
		/* DEBUG1 */
		MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
		/* POWER_LED */
		MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
		>;
		};

		pinctrl_pwm1: pwm1grp {
		fsl,pins = <
		MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
		>;
		};

		/* YaCO AUX Uart */
		pinctrl_uart1: uart1grp {
		fsl,pins = <
		MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
		MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_uart2: uart2grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
		MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
		MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
		MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
		>;
		};

		/* YaCO Touchscreen UART */
		pinctrl_uart3: uart3grp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
		MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_uart4: uart4grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
		MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_uart5: uart5grp {
		fsl,pins = <
		MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
		MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
		>;
		};

		pinctrl_usbotg: usbotggrp {
		fsl,pins = <
		MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
		/* power enable, high active */
		MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
		>;
		};

		pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <
		MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
		MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
		MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
		MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
		MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
		MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
		MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
		>;
		};

		pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <
		MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
		MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
		MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
		MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
		MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
		MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
		/* WL12xx IRQ */
		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
		>;
		};

		pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <
		MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
		MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
		MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
		MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
		MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
		MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
		MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
		MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
		MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
		MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
		MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
		>;
		};

		pinctrl_wifi_npd: wifinpdgrp {
		fsl,pins = <
		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
		>;
		};
		};

arch/arm/boot/dts/imx6qp-vicutp.dts

0 → 100644

+13 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
		/*
		* Copyright (c) 2014 Protonic Holland
		*/

		/dts-v1/;
		#include "imx6qp.dtsi"
		#include "imx6qdl-vicut1.dtsi"

		/ {
		model = "Kverneland UT1P Board";
		compatible = "kvg,vicutp", "fsl,imx6qp";
		};