Commit f274a854 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Tony Lindgren
Browse files

ARM: dts: ti: split interrupts per cells 



Each interrupt should be in its own cell.  This is much more readable.

Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20230730111533.98136-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent d49b1e4f

arch/arm/boot/dts/ti/davinci/da850.dtsi

+5 −10
Original line number Diff line number Diff line
@@ -421,7 +421,7 @@ edma0: edma@0 { 
			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */

			reg = <0x0 0x8000>;

			reg-names = "edma3_cc";

			interrupts = <11 12>;

			interrupts = <11>, <12>;

			interrupt-names = "edma3_ccint", "edma3_ccerrint";

			#dma-cells = <2>;
@@ -447,7 +447,7 @@ edma1: edma@230000 { 
			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */

			reg = <0x230000 0x8000>;

			reg-names = "edma3_cc";

			interrupts = <93 94>;

			interrupts = <93>, <94>;

			interrupt-names = "edma3_ccint", "edma3_ccerrint";

			#dma-cells = <2>;
@@ -494,8 +494,7 @@ serial2: serial@10d000 { 
		rtc0: rtc@23000 {

			compatible = "ti,da830-rtc";

			reg = <0x23000 0x1000>;

			interrupts = <19

				      19>;

			interrupts = <19>, <19>;

			clocks = <&pll0_auxclk>;

			clock-names = "int-clk";

			status = "disabled";
@@ -725,11 +724,7 @@ eth0: ethernet@220000 { 
			ti,davinci-ctrl-ram-offset = <0>;

			ti,davinci-ctrl-ram-size = <0x2000>;

			local-mac-address = [ 00 00 00 00 00 00 ];

			interrupts = <33

					34

					35

					36

					>;

			interrupts = <33>, <34>, <35>,<36>;

			clocks = <&psc1 5>;

			power-domains = <&psc1 5>;

			status = "disabled";
@@ -748,7 +743,7 @@ gpio: gpio@226000 { 
			gpio-controller;

			#gpio-cells = <2>;

			reg = <0x226000 0x1000>;

			interrupts = <42 43 44 45 46 47 48 49 50>;

			interrupts = <42>, <43>, <44>, <45>, <46>, <47>, <48>, <49>, <50>;

			ti,ngpio = <144>;

			ti,davinci-gpio-unbanked = <0>;

			clocks = <&psc1 3>;

arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi

+5 −5
Original line number Diff line number Diff line
@@ -455,8 +455,8 @@ target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */ 
			rtc: rtc@0 {

				compatible = "ti,am3352-rtc", "ti,da830-rtc";

				reg = <0x0 0x1000>;

				interrupts = <75

					      76>;

				interrupts = <75>,

					     <76>;

			};

		};
@@ -739,7 +739,7 @@ mac: ethernet@0 { 
				 * c0_tx_pend

				 * c0_misc_pend

				 */

				interrupts = <40 41 42 43>;

				interrupts = <40>, <41>, <42>, <43>;

				ranges = <0 0 0x8000>;

				syscon = <&scm_conf>;

				status = "disabled";
@@ -779,7 +779,7 @@ mac_sw: switch@0 { 
				syscon = <&scm_conf>;

				status = "disabled";



				interrupts = <40 41 42 43>;

				interrupts = <40>, <41>, <42>, <43>;

				interrupt-names = "rx_thresh", "rx", "tx", "misc";



				ethernet-ports {
@@ -899,7 +899,7 @@ pruss_mii_rt: mii-rt@32000 { 
				pruss_intc: interrupt-controller@20000 {

					compatible = "ti,pruss-intc";

					reg = <0x20000 0x2000>;

					interrupts = <20 21 22 23 24 25 26 27>;

					interrupts = <20>, <21>, <22>, <23>, <24>, <25>, <26>, <27>;

					interrupt-names = "host_intr0", "host_intr1",

							  "host_intr2", "host_intr3",

							  "host_intr4", "host_intr5",

arch/arm/boot/dts/ti/omap/am437x-l4.dtsi

+6 −6
Original line number Diff line number Diff line
@@ -442,8 +442,8 @@ rtc: rtc@0 { 
				compatible = "ti,am4372-rtc", "ti,am3352-rtc",

					     "ti,da830-rtc";

				reg = <0x0 0x1000>;

				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH

					      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;

				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,

					     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;

				clocks = <&clk_32768_ck>;

				clock-names = "int-clk";

				system-power-controller;
@@ -549,10 +549,10 @@ mac_sw: switch@0 { 
				syscon = <&scm_conf>;

				status = "disabled";



				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH

					      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH

					      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH

					      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;

				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,

					     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,

					     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,

					     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;

				interrupt-names = "rx_thresh", "rx", "tx", "misc";



				ethernet-ports {

arch/arm/boot/dts/ti/omap/omap5-board-common.dtsi

+3 −3
Original line number Diff line number Diff line
@@ -415,9 +415,9 @@ rtc { 


		gpadc: gpadc {

			compatible = "ti,palmas-gpadc";

			interrupts = <18 0

				      16 0

				      17 0>;

			interrupts = <18 0>,

				     <16 0>,

				     <17 0>;

			#io-channel-cells = <1>;

			ti,channel0-current-microamp = <5>;

			ti,channel3-current-microamp = <10>;