Commit 28e0721e authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: ni_atmio16d: fix block comments 



Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Move the configuration options comment into the comedi driver comment
block. That's were they typically are listed.

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 44a678b9

drivers/staging/comedi/drivers/ni_atmio16d.c

+47 −59
Original line number Diff line number Diff line 
/*

   comedi/drivers/ni_atmio16d.c

   Hardware driver for National Instruments AT-MIO16D board

   Copyright (C) 2000 Chris R. Baugher <baugher@enteract.com>



   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 2 of the License, or

   (at your option) any later version.



   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

 * Comedi driver for National Instruments AT-MIO16D board

 * Copyright (C) 2000 Chris R. Baugher <baugher@enteract.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; either version 2 of the License, or

 * (at your option) any later version.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/*

Driver: ni_atmio16d

Description: National Instruments AT-MIO-16D

Author: Chris R. Baugher <baugher@enteract.com>

Status: unknown

Devices: [National Instruments] AT-MIO-16 (atmio16), AT-MIO-16D (atmio16d)

 * Driver: ni_atmio16d

 * Description: National Instruments AT-MIO-16D

 * Author: Chris R. Baugher <baugher@enteract.com>

 * Status: unknown

 * Devices: [National Instruments] AT-MIO-16 (atmio16), AT-MIO-16D (atmio16d)

 *

 * Configuration options:

 *   [0] - I/O port

 *   [1] - MIO irq (0 == no irq; or 3,4,5,6,7,9,10,11,12,14,15)

 *   [2] - DIO irq (0 == no irq; or 3,4,5,6,7,9)

 *   [3] - DMA1 channel (0 == no DMA; or 5,6,7)

 *   [4] - DMA2 channel (0 == no DMA; or 5,6,7)

 *   [5] - a/d mux (0=differential; 1=single)

 *   [6] - a/d range (0=bipolar10; 1=bipolar5; 2=unipolar10)

 *   [7] - dac0 range (0=bipolar; 1=unipolar)

 *   [8] - dac0 reference (0=internal; 1=external)

 *   [9] - dac0 coding (0=2's comp; 1=straight binary)

 *   [10] - dac1 range (same as dac0 options)

 *   [11] - dac1 reference (same as dac0 options)

 *   [12] - dac1 coding (same as dac0 options)

 */



/*

 * I must give credit here to Michal Dobes <dobes@tesnet.cz> who

 * wrote the driver for Advantec's pcl812 boards. I used the interrupt
@@ -295,8 +311,10 @@ static int atmio16d_ai_cmd(struct comedi_device *dev, 
	unsigned int sample_count, tmp, chan, gain;

	int i;



	/* This is slowly becoming a working command interface. *

	 * It is still uber-experimental */

	/*

	 * This is slowly becoming a working command interface.

	 * It is still uber-experimental

	 */



	reset_counters(dev);
@@ -322,9 +340,10 @@ static int atmio16d_ai_cmd(struct comedi_device *dev, 
		outw(tmp, dev->iobase + MUX_GAIN_REG);

	}



	/* Now program the sample interval timer */

	/* Figure out which clock to use then get an

	 * appropriate timer value */

	/*

	 * Now program the sample interval timer.

	 * Figure out which clock to use then get an appropriate timer value.

	 */

	if (cmd->convert_arg < 65536000) {

		base_clock = CLOCK_1_MHZ;

		timer = cmd->convert_arg / 1000;
@@ -386,9 +405,10 @@ static int atmio16d_ai_cmd(struct comedi_device *dev, 
		outw(devpriv->com_reg_1_state, dev->iobase + COM_REG_1);

	}



	/* Program the scan interval timer ONLY IF SCANNING IS ENABLED */

	/* Figure out which clock to use then get an

	 * appropriate timer value */

	/*

	 * Program the scan interval timer ONLY IF SCANNING IS ENABLED.

	 * Figure out which clock to use then get an appropriate timer value.

	 */

	if (cmd->chanlist_len > 1) {

		if (cmd->scan_begin_arg < 65536000) {

			base_clock = CLOCK_1_MHZ;
@@ -566,38 +586,6 @@ static int atmio16d_dio_insn_config(struct comedi_device *dev, 
	return insn->n;

}



/*

   options[0] - I/O port

   options[1] - MIO irq

		0 == no irq

		N == irq N {3,4,5,6,7,9,10,11,12,14,15}

   options[2] - DIO irq

		0 == no irq

		N == irq N {3,4,5,6,7,9}

   options[3] - DMA1 channel

		0 == no DMA

		N == DMA N {5,6,7}

   options[4] - DMA2 channel

		0 == no DMA

		N == DMA N {5,6,7}



   options[5] - a/d mux

	0=differential, 1=single

   options[6] - a/d range

	0=bipolar10, 1=bipolar5, 2=unipolar10



   options[7] - dac0 range

	0=bipolar, 1=unipolar

   options[8] - dac0 reference

	0=internal, 1=external

   options[9] - dac0 coding

	0=2's comp, 1=straight binary



   options[10] - dac1 range

   options[11] - dac1 reference

   options[12] - dac1 coding

 */



static int atmio16d_attach(struct comedi_device *dev,

			   struct comedi_devconfig *it)

{