Commit 378f0231 authored by Julian Goldsmith's avatar Julian Goldsmith Committed by Bjorn Andersson
Browse files

ARM: dts: qcom: msm8974: Add OnePlus One 



OnePlus One is a smartphone launched in 2014 and is based on the
Snapdragon 801 SoC (-AC variant).

Supported features:
* ADSP
* Charger
* Coincell charger
* Fuel gauge
* Internal storage
* Touchscreen
* UART
* USB
* Wifi/Bluetooth

Signed-off-by: default avatarJulian Goldsmith <julian@juliangoldsmith.com>
Co-developed-by: default avatarOleg Chernovskiy <kanedias@keemail.me>
Signed-off-by: default avatarOleg Chernovskiy <kanedias@keemail.me>
Co-developed-by: default avatarLuca Weiss <luca@z3ntu.xyz>
Signed-off-by: default avatarLuca Weiss <luca@z3ntu.xyz>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221128172531.828660-2-luca@z3ntu.xyz
parent c8f740af

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -1061,6 +1061,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ 
	qcom-msm8974-sony-xperia-rhine-amami.dtb \

	qcom-msm8974-sony-xperia-rhine-honami.dtb \

	qcom-msm8974pro-fairphone-fp2.dtb \

	qcom-msm8974pro-oneplus-bacon.dtb \

	qcom-msm8974pro-samsung-klte.dtb \

	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \

	qcom-mdm9615-wp8548-mangoh-green.dtb \

arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts

0 → 100644
+417 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0

#include "qcom-msm8974pro.dtsi"

#include "qcom-pm8841.dtsi"

#include "qcom-pm8941.dtsi"

#include <dt-bindings/input/input.h>

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>



/ {

	model = "OnePlus One";

	compatible = "oneplus,bacon", "qcom,msm8974pro", "qcom,msm8974";

	chassis-type = "handset";

	qcom,msm-id = <194 0x10000>;

	qcom,board-id = <8 0>;



	aliases {

		serial0 = &blsp1_uart2;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};

};



&blsp1_i2c1 {

	status = "okay";



	fuel-gauge@55 {

		compatible = "ti,bq27541";

		reg = <0x55>;

		power-supplies = <&bq24196_charger>;

	};

};



&blsp1_i2c2 {

	status = "okay";



	rmi4-i2c-dev@20 {

		compatible = "syna,rmi4-i2c";

		reg = <0x20>;



		syna,startup-delay-ms = <100>;



		interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;

		vdd-supply = <&pm8941_l22>;

		vio-supply = <&pm8941_lvs3>;



		pinctrl-names = "default";

		pinctrl-0 = <&touch_default_state>;



		#address-cells = <1>;

		#size-cells = <0>;



		rmi4-f01@1 {

			reg = <0x1>;

			syna,nosleep-mode = <1>;

		};



		rmi4-f12@12 {

			reg = <0x12>;

			syna,sensor-type = <1>;

			/*

			 * Touchscreen size is 2040x1080, y-values between

			 * 1920-2040 are used for touchkey (menu, home & back).

			 * For now clip it off so we don't get touch events

			 * outside of the display area.

			 */

			syna,clip-y-high = <1920>;

		};

	};

};



&blsp1_i2c6 {

	status = "okay";



	bq24196_charger: charger@6b {

		compatible = "ti,bq24196";

		reg = <0x6b>;

		interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;

		omit-battery-class;

	};

};



&blsp1_uart2 {

	status = "okay";

};



&gcc {

	compatible = "qcom,gcc-msm8974pro-ac";

};



&pm8941_coincell {

	qcom,rset-ohms = <800>;

	qcom,vset-millivolts = <3200>;



	status = "okay";

};



&pronto {

	vddmx-supply = <&pm8841_s1>;

	vddcx-supply = <&pm8841_s2>;

	vddpx-supply = <&pm8941_s3>;



	pinctrl-names = "default";

	pinctrl-0 = <&wcnss_pin_a>;



	status = "okay";



	iris {

		vddxo-supply = <&pm8941_l6>;

		vddrfa-supply = <&pm8941_l11>;

		vddpa-supply = <&pm8941_l19>;

		vdddig-supply = <&pm8941_s3>;

	};



	smd-edge {

		qcom,remote-pid = <4>;

		label = "pronto";



		wcnss {

			status = "okay";

		};

	};

};



&remoteproc_adsp {

	cx-supply = <&pm8841_s2>;



	status = "okay";

};



&rpm_requests {

	regulators-0 {

		compatible = "qcom,rpm-pm8841-regulators";



		pm8841_s1: s1 {

			regulator-min-microvolt = <675000>;

			regulator-max-microvolt = <1050000>;

		};



		pm8841_s2: s2 {

			regulator-min-microvolt = <875000>;

			regulator-max-microvolt = <1050000>;

			regulator-always-on;

		};



		pm8841_s3: s3 {

			regulator-min-microvolt = <1050000>;

			regulator-max-microvolt = <1050000>;

		};

	};



	regulators-1 {

		compatible = "qcom,rpm-pm8941-regulators";



		vdd_l1_l3-supply = <&pm8941_s1>;

		vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;

		vdd_l4_l11-supply = <&pm8941_s1>;

		vdd_l5_l7-supply = <&pm8941_s2>;

		vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;

		vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;

		vdd_l9_l10_l17_l22-supply = <&vreg_boost>;

		vdd_l13_l20_l23_l24-supply = <&vreg_boost>;

		vdd_l21-supply = <&vreg_boost>;



		pm8941_s1: s1 {

			regulator-min-microvolt = <1300000>;

			regulator-max-microvolt = <1300000>;



			regulator-always-on;

			regulator-boot-on;

		};



		pm8941_s2: s2 {

			regulator-min-microvolt = <2150000>;

			regulator-max-microvolt = <2150000>;



			regulator-boot-on;

		};



		pm8941_s3: s3 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

			regulator-system-load = <154000>;



			regulator-always-on;

			regulator-boot-on;

			regulator-allow-set-load;

		};



		pm8941_l1: l1 {

			regulator-min-microvolt = <1225000>;

			regulator-max-microvolt = <1225000>;



			regulator-always-on;

			regulator-boot-on;

		};



		pm8941_l2: l2 {

			regulator-min-microvolt = <1200000>;

			regulator-max-microvolt = <1200000>;

		};



		pm8941_l3: l3 {

			regulator-min-microvolt = <1225000>;

			regulator-max-microvolt = <1225000>;

		};



		pm8941_l4: l4 {

			regulator-min-microvolt = <1225000>;

			regulator-max-microvolt = <1225000>;

		};



		pm8941_l5: l5 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pm8941_l6: l6 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;



			regulator-boot-on;

		};



		pm8941_l7: l7 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;



			regulator-boot-on;

		};



		pm8941_l8: l8 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pm8941_l9: l9 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2950000>;

		};



		pm8941_l10: l10 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2950000>;

		};



		pm8941_l11: l11 {

			regulator-min-microvolt = <1225000>;

			regulator-max-microvolt = <1350000>;

		};



		pm8941_l12: l12 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;



			regulator-always-on;

			regulator-boot-on;

			regulator-allow-set-load;

		};



		pm8941_l13: l13 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <2950000>;



			regulator-boot-on;

		};



		pm8941_l14: l14 {

			regulator-min-microvolt = <1800000>;

			regulator-max-microvolt = <1800000>;

		};



		pm8941_l15: l15 {

			regulator-min-microvolt = <2050000>;

			regulator-max-microvolt = <2050000>;

		};



		pm8941_l16: l16 {

			regulator-min-microvolt = <2700000>;

			regulator-max-microvolt = <2700000>;

		};



		pm8941_l17: l17 {

			regulator-min-microvolt = <2850000>;

			regulator-max-microvolt = <2850000>;

		};



		pm8941_l18: l18 {

			regulator-min-microvolt = <2850000>;

			regulator-max-microvolt = <2850000>;

		};



		pm8941_l19: l19 {

			regulator-min-microvolt = <2900000>;

			regulator-max-microvolt = <3350000>;

		};



		pm8941_l20: l20 {

			regulator-min-microvolt = <2950000>;

			regulator-max-microvolt = <2950000>;



			regulator-system-load = <200000>;

			regulator-allow-set-load;

			regulator-boot-on;

		};



		pm8941_l21: l21 {

			regulator-min-microvolt = <2950000>;

			regulator-max-microvolt = <2950000>;



			regulator-boot-on;

		};



		pm8941_l22: l22 {

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3000000>;

			regulator-allow-set-load;

		};



		pm8941_l23: l23 {

			regulator-min-microvolt = <3000000>;

			regulator-max-microvolt = <3000000>;

		};



		pm8941_l24: l24 {

			regulator-min-microvolt = <3075000>;

			regulator-max-microvolt = <3075000>;



			regulator-boot-on;

		};



		pm8941_lvs3: lvs3 {};

	};

};



&sdhc_1 {

	vmmc-supply = <&pm8941_l20>;

	vqmmc-supply = <&pm8941_s3>;



	pinctrl-names = "default", "sleep";

	pinctrl-0 = <&sdc1_on>;

	pinctrl-1 = <&sdc1_off>;



	status = "okay";

};



&tlmm {

	sdc1_on: sdc1-on-state {

		clk-pins {

			pins = "sdc1_clk";

			drive-strength = <4>;

			bias-disable;

		};



		cmd-data-pins {

			pins = "sdc1_cmd", "sdc1_data";

			drive-strength = <4>;

			bias-pull-up;

		};

	};



	touch_default_state: touch-default-state {

		int-pins {

			pins = "gpio61";

			function = "gpio";

			drive-strength = <2>;

			bias-disable;

			input-enable;

		};



		reset-pins {

			pins = "gpio60";

			function = "gpio";

			drive-strength = <2>;

			bias-pull-up;

		};

	};



	wcnss_pin_a: wcnss-pin-active-state {

		wlan-pins {

			pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";

			function = "wlan";

			drive-strength = <6>;

			bias-pull-down;

		};



		bt-pins {

			pins = "gpio35", "gpio43", "gpio44";

			function = "bt";

			drive-strength = <2>;

			bias-pull-down;

		};

	};

};



&usb {

	phys = <&usb_hs1_phy>;

	phy-select = <&tcsr 0xb000 0>;

	extcon = <&smbb>, <&usb_id>;

	vbus-supply = <&chg_otg>;



	hnp-disable;

	srp-disable;

	adp-disable;



	status = "okay";

};



&usb_hs1_phy {

	status = "okay";



	v1p8-supply = <&pm8941_l6>;

	v3p3-supply = <&pm8941_l24>;



	extcon = <&smbb>;

	qcom,init-seq = /bits/ 8 <0x1 0x64>;

};